Electronic Components
Explore our Semiconductors collection of professional tools and accessories.
1171 products
Showing 691-720 of 1171 products
Texas Instruments CMOS hex Schmitt-trigger inverter IC (74HC14, DIP14). Features high noise immunity, wide 2-6V range, and low power consumption.
High-speed CMOS octal D-type flip-flop with 3-state outputs, 15ns delay, 60MHz, 7.8mA, DIP-20 package.
Texas Instruments LM4040 shunt voltage reference, 2.5V, ±20ppm/°C, low noise. No output capacitor needed. TO-226AA package.
Texas Instruments LM741CN operational amplifier, 1 MHz bandwidth, 8-pin PDIP package for through-hole mounting. Suited to analogue circuit designs.
Texas Instruments LM5007MM adjustable DC-DC buck regulator with 9V to 75V input, 500mA output and MSOP-8 surface-mount package.
Texas Instruments 5V precision shunt voltage reference in TO-226AA package. Features ±1% initial tolerance and easy trimming.
Fixed LDO voltage regulator by TEXAS INSTRUMENTS. 3.3V output, 50mA, ultralow dropout. Ideal for battery-powered consumer electronics.
Texas Instruments BCD to 7 Segment Decoder/Driver in DIP-16 format. Features active-low outputs and open-collector drives for common-anode LEDs.
Texas Instruments LM2674 step-down regulator IC with 40V input, 5V output, 500mA load current, up to 96% efficiency and an 8-pin SOIC package.
Texas Instruments fixed 5V LDO voltage regulator, 800mA output, SOT-223-3 package. Includes current limiting and thermal shutdown.
TI SG3524N PWM controller: 8V-40V supply, 5.4V/100mA output, 300kHz, DIP-16. Ideal for power supplies & converters.
Texas Instruments 100mA LDO voltage regulator with ultra-low 75µA quiescent current & 30V input. Ideal for battery-powered systems.
Texas Instruments Fixed LDO Voltage Regulator offering 5V output and 1A current. Features reverse battery and transient protection for automotive use.
Texas Instruments LM337KCSE3 adjustable negative voltage regulator, 1.5 A output, -1.2 V to -37 V range, TO-220-3 through-hole package.
Texas Instruments fixed-output LDO regulator, 3V, 50mA, SOT-23-5 package. Low dropout, ideal for battery devices.
Texas Instruments LP2950CZ 5V 100mA fixed LDO voltage regulator in TO-92 package. Low 75µA quiescent current, 380mV dropout at 100mA.
Texas Instruments 8-bit multiplying DAC for microprocessor interfacing. Features 10 MSPS, parallel interface, low glitch & operates from 5-15V supply.
High-voltage NPN Darlington transistor array by STMICROELECTRONICS. 50V, 500mA, 1000hFE gain. Ideal for driving solenoids, motors, and LEDs.
BC856B dual PNP transistor array, -65V, -100mA, SOT-363. Ideal for power management and industrial use.
Diodes BC847BS-7-F dual NPN transistor array in SOT-363 package. 45 V, 100 mA and minimum hFE of 200 for switching and AF amplifier use.
Texas Instruments NPN Bipolar Transistor Array, 50V, 500mA, SOIC. Ideal for relay, motor, lamp and display drivers. Features integrated suppression diode.
Texas Instruments ULN200x NPN Darlington transistor array in 16-pin DIP. Seven channels, up to 500 mA each, with built-in suppression diodes.
Dual PNP transistor array from NEXPERIA. 30V, 100mA, 250mW in SOT-143B package. Ideal for current mirrors & stable biasing.
Matched PNP transistor array for low-power amplification & switching. -150V, 200mA, SOT-26 package. Ideal for aerospace & industrial use.
Nexperia BC847BPN NPN/PNP transistor array in SC-88 (SOT-363) package, 45V, 100mA, 250mW per transistor. Surface mount, 6-pin.
ONSEMI PNP bipolar power transistor, 100V, 3A, 15W in TO-252 package. AEC-Q101 qualified for automotive use.
Nexperia 40V, 200mA NPN switching transistor in SMD package. AEC-Q101 qualified for reliable performance.
FZT853 NPN transistor: 100V, 6A, 3W, SOT-223, surface mount. Low saturation voltage, high current capacity.
High-quality PNP power transistor, 80V, 8A, 20W. AEC-Q101 qualified, surface mount TO-252. Ideal for power switching and amplifiers.
High reliability NPN Darlington transistor, 120V, 1.5A, SOT-223 SMD. AEC-Q101 qualified for lamp, relay & solenoid driving.