Electronic Components
Explore our Semiconductors collection of professional tools and accessories.
1171 products
Showing 61-90 of 1171 products
ISOCOM 1-channel DIP optocoupler with NPN phototransistor output, 4 pins, 50mA forward current, and 5.3kV isolation voltage.
ISOCOM 6-pin zero crossing optocoupler with 5.3kV isolation. Ideal for motor drive control, consumer electronics & industrial applications.
Compact VISHAY optocoupler with transistor output, 50mA forward current, 3.75kV isolation, ideal for networking.
ISOCOM 4-channel optocoupler with 5.3kV isolation & 50% CTR for industrial, computing & measurement applications. DIP-16 package.
Broadcom HCPL-4200 optocoupler for 20mA current loops. 3.75kV isolation, 8-pin DIP, for motor control & data comms.
Broadcom dual-channel optocoupler with 5kV isolation, 50% CTR and 70V Vceo. Ideal for signal processing.
Broadcom 2-channel SMD optocoupler in DIP-8 package, rated 5 kV isolation, 50 mA forward current and 130% minimum CTR for signal isolation.
STMicroelectronics TIP125 PNP Darlington transistor rated 60V, 65W and 5A in TO-220 case. For driver stages, motor control and audio amplifiers.
STMicroelectronics L4941BV 5V, 1A low dropout voltage regulator. Features 450mV dropout, thermal protection & reverse polarity protection for industrial & battery use.
ONSEMI 4-bit quad SR latch with tri-state outputs in SOIC package. Features 175ns propagation delay and 3-18V supply. Ideal for industrial use.
NXP P82B96 bus buffer IC in an SOIC-8 package. Non-latching bidirectional I²C interface with 400pF and 4000pF bus capacitance sides.
FTDI FT232RNL USB to UART interface bridge IC with 28-pin SSOP package, 3.3V to 5.25V supply and up to 3MBaud UART data transfer speed.
LNK304GN-TL off-line switcher IC in PDIP-8 package from Power Integrations. For buck, buck-boost and flyback designs under 360 mA.
DIODES INC. 3.3V 800mA LDO voltage regulator in SOT223 package. Features ±1% accuracy, thermal shutdown, and 70dB ripple rejection.
1.5MHz step-up DC/DC converter by Diodes Inc. SOT-23-5 SMD, 2.6-16V input, adjustable output up to 29V. Ideal for LCD bias & LED drivers.
AP2210 300mA ULDO regulator with ultra-low dropout, 1µA standby, and 75dB PSRR ideal for RF & battery devices.
General purpose 2-channel operational amplifier by STMicroelectronics. 3MHz bandwidth, 1.5V/µs slew rate, SOIC-8 surface mount. -40°C to 125°C.
Stable 3.3V output, input 4.5V-45V, 80mA, low dropout, surface mount SOT-23
Diodes AP2112K-3.3TRG1 3.3V LDO voltage regulator with 600mA minimum output current, enable function and SOT-25-5 surface-mount package.
TI TCA9548APWR 8-channel I2C switch, TSSOP-24, 1.65V-5.5V, for servers & routers.
Texas Instruments SN65176BDR RS422/RS485 bus transceiver in 8-pin SOIC, 5V supply, -40°C to 105°C, for multipoint bus communication.
Texas Instruments MAX3232CPWR RS-232 transceiver IC, 3V to 5.5V supply, 250 kbps signalling and ±15kV ESD protection on bus terminals in TSSOP-16.
Texas Instruments TXS0102DCUR 2-bit bidirectional voltage level translator in VSSOP-8 package. Operates from -40°C to 85°C for mixed-voltage designs.
Texas Instruments SN74LVC2G34 dual buffer gate IC in SOT-23-6. Operates 1.65 V to 5.5 V VCC with IOFF partial-power-down support.
Texas Instruments SN74LV1T125 single buffer gate, 3-state output, SOT-23-5 package. Supports 1.8V to 3.3V level translation.
Texas Instruments single Schmitt-trigger buffer for 1.65V-5.5V operation. Features IOFF circuitry & SOT-23-5 package.
MICROCHIP 2 Kbit Serial EEPROM with Microwire interface in 6-pin SOT-23 package. Wide 2.5-5.5V range & -40°C to 125°C operation.
NXP PCA9955BTWJ 16-channel I2C LED driver for RGBA LEDs. 57mA/20V output, constant current, precise PWM dimming & blinking control.
NXP CAN Interface IC, ISO 11898 standard, 1 Mbaud, SOIC 8-pin. Ideal for high-speed automotive applications with EMI protection.
Low-power ST3232CDR RS232 transceiver IC for 3-5.5V systems. 2 drivers, 2 receivers, 400kbps data rate. Ideal for portable devices.