Showing 34351-34380 of 116013 products
Streetwize
Secure tough loads with the STREETWIZE 5m heavy duty ratchet tie down strap. Robust webbing and strong ratchet for cargo, machinery & equipment.
Pro Signal
Short 0.2m black micro USB cable by Pro Signal UK. Ideal for charging and syncing devices without cable clutter.
Olan
OLAN zinc coated steel mounting plate for wall mount enclosures. Suits boxes 240x190mm. Durable and corrosion resistant.
CE-TEK
Versatile CE-TEK IP65 rated ABS enclosure with a transparent lid for housing electronics. Dust and water jet protected for indoor/outdoor use.
AMPHENOL
AMPHENOL 75 Ohm BNC right angle PCB jack with gold-plated contacts. Ideal for RF communications, supports up to 2GHz.
Neutrik
75-ohm isolated BNC feedthrough for 4K/8K video. Metal D-shaped housing for panel mount. Reliable for SDI & UHD.
BNC plug to BNC plug adaptor from Pro Signal UK. Joins socket-ended leads or converts genders in-line for video, CCTV, test.
Speedy RJ45
Secure your network with Speedy RJ45 Category 6 SpeedyLock Boots. Tamper-resistant, snag-less design for Cat 6 and 6a patch cords.
Webro
DIY WEBRO TV coax plug & socket kit for easy aerial extensions. Screw-on, no tools needed. Ideal for home TV & satellite setups.
Ideal-Tek
IDEAL-TEK RJ45 Cat5e feed-through plugs. Pass-through design for easy alignment and crimp-and-trim for reliable terminations.
Clever Little BOX
Reliable 9 pin D-sub plug with screw termination. Rated 30Vdc/0.5A, -40°C to 85°C. Compact and sturdy for custom wiring.
Multicomp Pro
Durable nylon backshell for DE 9-pin connectors. Snap-fit hood protects terminations, with colour coding for cable identification.
Compact 1.27mm half-pitch pin header, 2x20 way vertical. Saves PCB space for board-to-board & ribbon cable interfaces. 33x15x43mm.
Multicomp Pro D-sub 15-way terminal block interface. Converts DA-15 to screw terminals for clean, serviceable control wiring. DIN rail mount.
Compact 3.81mm pitch, 6-way PCB terminal block for 26-16 AWG wire. Ideal for control and instrumentation boards. Screw-clamp connection.
Buy Multicomp Pro red female push-on crimp terminals (2.8x0.8mm). Pack of 100 for small spade tabs & fine wire. Reliable quick-connect.
Professional 25mm² tinned copper crimp terminal lug for M6 studs. Ideal for heavy-duty electrical connections in industrial & automotive applications.
Multicomp Pro 4mm stackable banana plug, 24A. Features a stackable rear socket and colour coding for easy identification of common lines.
IP67 sealed RF cable assembly (200mm) from N-Type bulkhead jack to U.FL jack. Ideal for outdoor access points & harsh environments. 50 ohm.
RF coaxial cable assembly, BNC plug to BNC plug, RG58/U, 50 ohm, 500mm. Ideal for test and instrumentation applications.
TUK
Moisture-sealed gel splice crimp connectors for telecom and signal wire. Pack of 100. Crimp with ordinary pliers.
PRO-ELEC
PRO ELEC filtered IEC inlet for 250V AC. Integrated line filter cleans power for audio & lab equipment. Panel-mount, compact design.
USB 3.0 female connector breakout board by Clever Little BOX. Routes all signals to solderable pads. Ideal for prototyping and diagnostics.
WAGO
Tool-free WAGO 2-conductor DIN rail terminal block with push-in clamp. Rated 500V/13A, for 16-24AWG wire. Fast, reliable control panel connections.
WAGO 2-conductor push-in terminal block with release button. Rated 800V/17.5A for 22-14AWG wire. Blue housing for neutral wiring.
Green WAGO 4-conductor ground terminal block with push button and test port for 35mm DIN rail. Fits 22AWG to 12AWG wire.
WAGO 800V 57A terminal block with push button cage clamp & test port for tool-free, high-current power circuit connections.
WAGO green 3-conductor ground terminal block, lever push-in, for 35mm DIN rail, 20-8 AWG, secure earth wiring.
Compact WAGO DIN rail terminal block with push-button cage clamp for 22-12AWG wires. Ideal for control & instrumentation panels.
Neutrik blue PowerCon chassis power inlet plug, 16A 250V AC. Secure locking connector for pro audio & lighting equipment.
