Showing 63751-63780 of 73749 products
Binder
Durable Binder 3-way panel mount socket with solder contacts, ideal for industrial wiring applications.
AMP - TE CONNECTIVITY
8-way Micro-Match cable (250mm) with 28AWG wiring & 1.27mm pitch. UL 2651 rated for electronics & industrial use.
BINDER
BINDER 678 Series 7-way plug with bayonet locking and silver-plated brass contacts—ideal for industrial use.
Durable BINDER 680 Series 4-way socket with silver-plated contacts, 250V/6A rating. Ideal for industrial applications.
BINDER 3-way free socket with gold-plated bronze contacts for industrial applications. Reliable and durable with M9 screw locking.
LUMBERG
LUMBERG 3-pole threaded panel socket, IEC 61076-2-106 compliant, with 1500V rating & IP68 protection. Ideal for industrial & networking use.
JST (JAPAN SOLDERLESS TERMINALS)
JST 3-way socket connector with 2.5mm pitch, rated 3A/250V. Ideal for industrial wire-to-wire connections.
MOLEX
MOLEX Micro-Fit 3.0 plug (4-way, 3mm pitch) for automotive, industrial & medical wiring applications.
Durable tin-plated brass crimp pin for Super Seal 1.5 connectors, rated for 6A and automotive use.
Reliable 28-way CPC Series 2 circular connector with 7.5A rating, UL94V-0 thermoplastic, for industrial & commercial use.
Durable 8-way strain relief by Molex for Mini-Fit Jr.™ housings. Ideal for automotive & industrial use. Temp range: -40°C to 105°C.
HIRSCHMANN
DIN-standard 16A industrial plug with PG9 gland & tin-plated contacts for reliable 250V power connections in harsh environments.
JST PH Series 2-way connector housing, 2mm pitch, UL94V-0 rated. For use with BPH/SPH crimp contacts. Ideal for industrial applications.
JST 10-way top-entry SMD header, 2mm pitch, 2A/100V, tin-plated brass contacts for reliable wire-to-board connections.
Reliable JST XH Series 6-way vertical header (2.5mm pitch) for wire-to-board connections in electronics & industrial applications.
MOLEX 20-way vertical header with gold-plated brass contacts, ideal for industrial, automotive, and consumer electronics.
HARWIN
HARWIN 8-way dual-row header with gold-plated contacts, 2.54mm pitch. Ideal for PCB connections and industrial applications.
MULTICOMP PRO
12-way, 2.54mm pitch crimp housing for industrial and networking applications with high-temperature plastic insulator. UL 94V-0 rated.
PHOENIX CONTACT
Durable PCB terminal block with 2.54mm pitch, screw connection and PA insulation. Ideal for industrial applications.
Industrial-grade Phoenix Contact PCB terminal block (5.08mm pitch, 3 way, green) with screw connections for 26-14AWG wires. UL94 V-0 rated.
WEIDMULLER
WEIDMÜLLER 8-way top entry header with 3.5mm pitch spacing, tin-plated copper contacts for reliable connections.
Multicomp
Multicomp IEC C14 inlet with DPST switch & fuse holder. Rated 10A/250V, ideal for industrial/electronic power connections.
Durable LUMBERG low-voltage plug (1.7mm, 2A, 6.3V) with solder terminals & bend protection for industrial & power applications.
WALTHER
Industrial 32A 400V CEE socket with IP44 rating. Wall-mount 3P+N+E design for reliable power distribution in tough environments.
High-performance RF BNC crimp plug (75 ohm, 11GHz) with gold-plated contacts for BT2002 cables. Ideal for communications & industrial use.
HIROSE(HRS)
High-performance Hirose SMA to UFL adaptor for RF, audio & networking, with gold-plated contacts & 6GHz frequency.
Nickel-plated brass SMA to BNC adapter, 50 Ohm impedance with gold-plated contacts for reliable signal transmission.
15-pin right-angle D-sub plug with gold contacts for industrial, networking & computer applications. Steel shell & PBT insulator.
MH CONNECTORS
Durable zinc 9-way D sub backshell with 360° EMI shielding for industrial cable management. Temperature resistant -40°C to 120°C.
BULGIN LIMITED
Shielded RJ45 connector, IP68 rated, panel mount, 8P8C—ideal for industrial and harsh environments.