Showing 9211-9240 of 116084 products
Seeed Studio
Advanced Arduino-compatible dev board with Nordic nRF52840, BT 5.0, IMU & mic for TinyML projects.
Cytron
GPIO expansion board for Raspberry Pi 400. Extends all pins, has LEDs, buzzer, buttons, Grove ports, and 3.3V regulator.
Kemet
KEMET SBC Series ferrite power inductor, 470µH, unshielded. Ideal for DC/DC converters, noise filters, LED lighting & power supplies.
KEMET SBC Series ferrite power inductor (33µH) with 1.1A RMS, unshielded, suitable for DC/DC converters and noise filters.
KEMET SBC Series ferrite power inductor, 3.3mH, unshielded drum core. Ideal for DC/DC converters, noise filters and LED lighting.
KEMET SBC Series 4.7µH ferrite power inductor for DC/DC converters & noise filters. 5.8A Irms, 7.1A Isat, up to +105°C.
KEMET SBC Series 47µH ferrite power inductor, 2.3A Irms, for DC/DC converters, noise filters, LED lighting & power supplies.
KEMET 47µH ferrite power inductor for DC/DC converters & noise filters. Unshielded, 2.8A Irms, 5.2A Isat, operating to +105°C.
KEMET SBC Series 6.8mH ferrite power inductor for DC/DC converters & noise filters. 310mA RMS, 440mA saturation current. Buy online.
KEMET SBC Series 56µH ferrite power inductor for DC/DC converters & noise filters. 1.8A Irms, 4A Isat, operating to +105°C.
Raspberry Pi
Official 27W USB-C PD power supply for Raspberry Pi 5. Unlocks high-power USB peripherals with stable 5.1V/5A output and intelligent power management.
SB Components
Add 2G GSM connectivity to your Raspberry Pi with the SB Components PiTalk HAT. Make calls, send SMS, and connect IoT devices without WiFi.
Secure your PC or microcontroller with the SB Components USB Fingerprint Board. Features Nuvoton MCU, Cortex M23 security & 508dpi resolution.
Infineon
Infineon 55V, 4.7A dual N-channel MOSFET in SO-8 package. Low 0.043ohm Rds(on) for efficient power switching in converters & motor drives.
Cyntech
Protect your Raspberry Pi 5 with the Cyntech Aluminium Armour Case in Black. Features dual PWM fans and silicone heatsinks for optimal cooling.
AB Components
IP65 rated 12V LED panel indicator light from AB COMPONENTS. 22mm panel cut-out, green illumination, for industrial control & machinery.
Nexperia
Nexperia 74HCT08 quad 2-input AND gate IC in SOIC-14 package. 4.5-5.5V operation, for industrial & digital logic circuits.
Onsemi
ON Semiconductor FIN1001 LVDS differential driver, SOT-23, 5-pin. High-speed, low power, ideal for consumer electronics.
Diodes Inc.
Single 1-input inverter, 1.65-5.5V, Schmitt trigger, SOT-353. Ideal for mixed-voltage & power-down apps.
Microchip
High-speed MICROCHIP MCP2562 CAN transceiver IC for automotive networks. 1Mbps, AEC-Q100 Grade 0, robust ESD/EMC protection.
Microchip 10/100 Ethernet PHY transceiver IC in QFN-32 package. Features RMII, cable diagnostics & industrial temp range for embedded designs.
Texas Instruments
4-Channel low noise operational amplifier by Texas Instruments. 3MHz bandwidth, 7V-36V supply, SOIC-14 surface mount.
Texas Instruments 4-bit bus transceiver with voltage level shifting, 3.1ns delay, and Ioff for power-down. Ideal for industrial & portable devices.
DIODES INC. synchronous buck converter: 3.8-32V input, 5V output, 2A, TSOT-26, EMI reduction for reliable power.
52Pi
Expand your Raspberry Pi 5 with the 52PI M02 Mini PCI-Express HAT. High-speed PCI-Ex interface for network cards and more.
Broadcom
Broadcom HCNW136-000E high-speed optocoupler with 3.75kV isolation. 8-pin DIP, TTL compatible, 1Mb/s. Ideal for power supplies & logic isolation.
Isocom
ISOCOM MOC3020X 6-pin DIP optocoupler with 5.3kV isolation & non-zero crossing TRIAC output. Ideal for motor control & AC switching.
VISHAY
VISHAY VOM160NT phototriac optocoupler with 3.75kV isolation. Non-zero crossing, 600V rating. For SSRs, motor drives & industrial controls.
High-intensity BROADCOM green LED (569nm, 5mm). Ideal for switches, panel backlighting & indicators. 20mA, 2.2V, through hole mount.
CML
CML multicolour panel LED indicator with satin chrome bezel. Red/yellow/green, 8mm mount, 30mA, IP67 rated for industrial use.