118278 products
Showing 14731-14760 of 118278 products
IP65 rated 12V LED panel indicator light from AB COMPONENTS. 22mm panel cut-out, green illumination, for industrial control & machinery.
Nexperia 74HCT08 quad 2-input AND gate IC in SOIC-14 package. 4.5-5.5V operation, for industrial & digital logic circuits.
ON Semiconductor FIN1001 LVDS differential driver, SOT-23, 5-pin. High-speed, low power, ideal for consumer electronics.
Single 1-input inverter, 1.65-5.5V, Schmitt trigger, SOT-353. Ideal for mixed-voltage & power-down apps.
Microchip MCP2562-E/P CAN transceiver IC, PDIP-8, up to 1Mb/s. ISO-11898-2 and ISO-11898-5 compliant for automotive and industrial networks.
Microchip KSZ8081RNBIA 10BASE-T/100BASE-TX Ethernet PHY transceiver IC in a 32-pin QFN package with RMII and MDIO interface.
4-Channel low noise operational amplifier by Texas Instruments. 3MHz bandwidth, 7V-36V supply, SOIC-14 surface mount.
Texas Instruments 4-bit bus transceiver with voltage level shifting, 3.1ns delay, and Ioff for power-down. Ideal for industrial & portable devices.
DIODES INC. synchronous buck converter: 3.8-32V input, 5V output, 2A, TSOT-26, EMI reduction for reliable power.
Expand your Raspberry Pi 5 with the 52PI M02 Mini PCI-Express HAT. High-speed PCI-Ex interface for network cards and more.
Broadcom HCNW136-000E high-speed optocoupler with 3.75kV isolation. 8-pin DIP, TTL compatible, 1Mb/s. Ideal for power supplies & logic isolation.
ISOCOM MOC3020X 6-pin DIP optocoupler with 5.3kV isolation & non-zero crossing TRIAC output. Ideal for motor control & AC switching.
VISHAY VOM160NT phototriac optocoupler with 3.75kV isolation. Non-zero crossing, 600V rating. For SSRs, motor drives & industrial controls.
High-intensity BROADCOM green LED (569nm, 5mm). Ideal for switches, panel backlighting & indicators. 20mA, 2.2V, through hole mount.
CML multicolour panel LED indicator with satin chrome bezel. Red/yellow/green, 8mm mount, 30mA, IP67 rated for industrial use.
High-intensity, watertight red LED panel indicator. 24VDC, 17.46mm mount. Daylight visible & long-life for industrial, automotive, aerospace.
Midas Displays 0.96 inch graphic OLED, 128 x 64 pixels, yellow and blue on black, SSD1306 controller, I2C interface and 3.3V logic voltage.
Beagleboard BeagleY-AI open source single board computer with quad-core Arm Cortex-A53 CPU, 4 GB LPDDR4 RAM and 4 TOPS AI performance.
Compact DFRobot Beetle ESP32-C3 dev board with RISC-V core, Wi-Fi/Bluetooth 5, and lithium charging. Ideal for wearables and IoT.
Compact fibreglass PCB engineering ruler (160x32mm) with design references for efficient PCB work.
Convert NPN to PNP signals with the DFROBOT adaptor module. Features overcurrent protection, surge absorption & 5-24VDC operating voltage.
Compact DFROBOT IR beam sensor for motion & speed detection. 50cm range, <2ms response, works with Arduino. Ideal for robotics.
All-in-one RP2350 development board with 2.8” LCD, breadboard & sensors. Program in C/C++ or MicroPython. Perfect for learning & prototyping.
High-density 1-channel optocoupler, SOP-4, 50mA, 3.75kV isolation, CTR 130%. Ideal for industrial and computer signal isolation.
ISOCOM ISQ201X 4-channel optocoupler in 16-pin DIP. 5.3kV isolation, 50mA forward current, 75% CTR. For industrial & computing applications.
ISOCOM SFH615A-2X optocoupler, 1-channel DIP-4, 5.3kV isolation, 50mA, CTR 63%. Ideal for industrial controllers.
1-channel optocoupler with photodarlington output, 5.3kV isolation, 6 pins, SMD DIP. Ideal for signal transmission.
Whadda WPM449 audio recording module with built-in microphone and up to 20 seconds of non-volatile flash storage for electronics projects.
BOURNS SMBJ unidirectional TVS diode for 12V circuits. Offers 600W surge protection, 19.9V clamping & AEC-Q101 qualification for industrial/auto use.
Littelfuse Transil 1.5KE TVS diode, 30.8V standoff, 1500W surge, DO-201 package, ideal for protecting sensitive electronics.
