118278 products
Showing 15691-15720 of 118278 products
KEMET SBC Series 100µH ferrite power inductor for DC/DC converters & noise filters. NiZn core, 1A saturation, for LED, TV & power supply applications.
KEMET unshielded ferrite power inductor, 1µH, 7.4A Irms. For DC/DC converters, noise filters, LED drivers & power supplies.
KEMET 15µH unshielded ferrite power inductor for DC/DC converters & noise filters. 9.1A saturation, 3.8A RMS current.
KEMET SBC Series 15µH power inductor, 4.8A RMS, 9.6A saturation, NiZn core. Ideal for DC/DC converters.
KEMET 15µH unshielded power inductor for DC/DC converters & noise filters. Ideal for power supplies, LED lighting & smart meters.
KEMET unshielded ferrite power inductor, 1500uH (1.5mH). For DC/DC converters, noise filters, LED lighting & power supplies.
UNO R4 WiFi development board with 32-bit Arm Cortex-M4 processing, Wi-Fi and Bluetooth, 256 KB flash and UNO-format footprint.
Connect displays easily with the official Raspberry Pi 5 FPC Display Cable. Fits the four-lane MIPI connectors for reliable data transfer.
Ultra-compact RP2040 board with dual-core CPU, 2MB flash, USB-C, and 22 GPIOs. Ideal for embedded projects.
Protect your Raspberry Pi 5 with the PIMORONI Pibow Coupe 5 Case in Ninja Black. Slim, hackable, and compatible with HATs and the official cooler.
Multicomp Pro insulated transistor kit for TO-3 packages. Mica body, 1kV breakdown voltage. Pack of 10.
30mm blower fan for Raspberry Pi 5 by The Pi Hut. Side-exhaust design, direct replacement for the official active cooler, 5V and 0.2A.
ONSEMI MM74HC132 quad 2-input NAND Schmitt trigger IC. Low power, high noise immunity, drives 10 TTL loads. 14-pin SOIC package.
NEXPERIA 8-channel analogue multiplexer/demultiplexer, 4.5V to 15.5V, SOIC 16-pin. Ideal for signal processing and surface mount applications.
Nexperia 74LVC1G66GW SPST bilateral analogue switch in TSSOP. 1.65 V to 5.5 V supply, 6.2 Ω typical ON resistance, -40 °C to +125 °C.
Infineon 64Kbit SPI FRAM NVRAM offering 151-year data retention & 100 trillion write cycles. AEC-Q100 qualified, 8-pin SOIC package.
Nexperia 74LVC1G17 single Schmitt trigger buffer IC in TSSOP-5. 1.65 V to 5.5 V supply, AEC-Q100 Grade 1 qualified, IOFF partial power-down support.
Microchip PIC32MM 32-bit Flash MCU, 25MHz, 256KB, TQFP 48 pin, rich interfaces & ADC. Ideal for embedded & IoT projects.
4-bit dual-supply non-inverting bus transceiver in TSSOP-16 package. Features voltage-level shifting (1.2V-3.6V) and IOFF support.
Diodes AP2112K-3.3TRG1 3.3V LDO voltage regulator with 600mA minimum output current, enable function and SOT-25-5 surface-mount package.
ONSEMI 74HC14 Hex Inverter Logic IC with Schmitt trigger input. 14-pin SOIC, 2-6V supply. Ideal for automotive & industrial noisy environments.
Learn Python & electronics with Programming ESP32 by Simon Monk. Covers ESP32 Lite & DevKit 1, sensors, WiFi & more. No prior knowledge needed.
Broadcom 2-channel Darlington optocoupler in DIP-8 package. Features 3.75kV isolation and 300% min CTR for signal processing and networking.
VISHAY H11D1 1-channel optocoupler with transistor output, DIP-6, 60mA, 5.3kV isolation. High BVCER, suitable for industrial networking.
BIVAR PLP5 transparent circular light pipe, 3.2mm. Press fit panel mount with UL94V-0 rating. Ideal for lighting applications.
Broadcom right angle RGB SMD LED with dome lens and 125° viewing angle. Ideal for back-lighting, status indication and front panel illumination.
Dialight 5mm RGB through hole LED, 20mA per colour with clear round lens and 50° viewing angle. For status indicators and PCB projects.
Reliable red 3mm LED lamp with 635nm wavelength, through-hole mount, and high light output for industrial use.
Wurth Elektronik WL-SBRW bi-colour SMD LED (Red/Green). 120° viewing angle, 1205 rectangular lens. Ideal for indicators & backlighting.
Expand serial ports with the DFROBOT Gravity I2C to Dual UART Module. Ideal for IoT, GPS, and ultrasonic projects. Supports up to 1Mbps data rate.
