118278 products
Showing 16351-16380 of 118278 products
Adjustable LDO regulator from Microchip, 300mA output, 2.1-6V input, low quiescent current. SOT-23-5 package for portable devices.
ONSEMI fixed 5V, 1A buck switching regulator with thermal shutdown. 4.75V-40V input, surface mount TO-263-5 package. Ideal for industrial use.
ONSEMI NCP1117DT50G 5V/1A fixed LDO regulator. Low dropout, high accuracy & full protection. Ideal for power management.
STMICROELECTRONICS 7812 fixed 12V, 100mA linear voltage regulator in SOT-89-3 package. Ideal for low-power PCB designs.
Fixed 5V, 1.2A LDO voltage regulator from STMicro. High PSRR, 350mV dropout, 2.5-18V input. Ideal for SMPS & DC-DC post-regulation.
Precise 3.3V MICROCHIP voltage reference IC in SOT-23-6 package. Features 0.1% accuracy, 50ppm/°C temp coefficient for stable analogue circuits.
Adjustable DC-DC step down regulator by TEXAS INSTRUMENTS. 5.5V-36V input, 31V/3A output, 95% efficiency. Surface mount.
TI TLV70233DBVR fixed LDO regulator: 3.3V, 300mA, 260mV dropout, low quiescent current, ideal for battery devices.
Texas Instruments 2.5V precision shunt voltage reference IC. AEC-Q100, SOT-23, no output capacitor needed. For portable & automotive use.
Texas Instruments LM2672M-ADJ adjustable DC-DC buck regulator with 1A output, 6.5V to 40V input range and 8-pin SOIC surface-mount package.
Texas Instruments LM1117 adjustable voltage regulator, 800mA output, SOT-223 package. Output 1.25V to 13.8V with two external resistors.
Texas Instruments synchronous buck step-down regulator, fixed 3.3V output, 1A, 3V-17V input, WSON-8 package. Ideal for portable devices.
Precision LM4041 series voltage reference IC in SOT-23 package. Adjustable from 1.233V to 10V, low noise, no capacitor required.
Diodes Inc. AP63300WU-7 synchronous buck converter. 3.8-32V input, adjustable 0.8-31V output, 3A current. Low-EMI design for power supplies.
Beginner-friendly SparkFun Arduino kit with RedBoard Qwiic. Build 11 circuits with no soldering. Includes guide, sensors & components.
Compact WINSTAR 8x32 character LCD module with white on blue STN display and LED backlight. Ideal for control panels and instrumentation.
Compact 3.3V relay HAT for Raspberry Pi Pico. Control AC/DC devices with 2 channels. Stackable design with LED indicators.
Bourns TBU-CA series SMD high-speed bidirectional surge protector. 300V AC, 1 pole, PCB surface mount. Protects against overvoltage & lightning.
LITTELFUSE SMBJ unidirectional TVS diode, 5V standoff, 9.2V clamping. Surface mount DO-214AA for ESD & EFT protection in electronics.
Microchip 16-bit I/O Expander with I2C interface, 1.8V-5.5V supply, and SSOP package. Ideal for signal processing and consumer electronics.
Microchip ATTINY84A-PU 8-bit AVR microcontroller with 8KB program memory, 512 bytes EEPROM and RAM, 14-pin DIP and up to 20 MHz.
Low-power AVR ATmega328 MCU: 32KB flash, 20MHz, 32-pin TQFP, 1.8-5.5V, -40°C to 105°C. Ideal for embedded systems.
74HC4538D dual retriggerable monostable multivibrator, 2-6V, 24ns, SOIC-16 for timing and pulse control.
ONSEMI NC7S08M5X CMOS AND gate. High speed (3.5ns), low power (<1µA), wide 2-6V range. Ideal for industrial & digital logic designs.
STMICROELECTRONICS 3.3V TVS diode for ESD protection. 200W pulse power, unidirectional, DO-216AA package. For portable electronics.
TI SN74LVC2T45 bus transceiver for 1.65V-5.5V logic level translation. Low power, 3.9ns delay, VSSOP-8 package. For industrial & consumer use.
Texas Instruments 74HC04 hex inverter IC. 6 gates, 2-6V supply, low power. For communications, consumer electronics & metering.
Texas Instruments 3.3V LDO regulator, 800mA output, 1.2V dropout. Features current limiting & thermal shutdown for stable power management.
High-speed bidirectional TVS diode by Wurth Elektronik. Ideal for USB 2.0, Ethernet & PoE. Features low clamping voltage & SOT-23 case.
High-quality Multicomp PRO LED Light Bar Graph Array with 20mA forward current and 30mcd luminous intensity. Ideal for signal and level indication.
