118278 products
Showing 17521-17550 of 118278 products
270V Zener diode from VISHAY, 3.25W, SOD-57, through-hole, AEC-Q101 qualified. Fast clamping and high temp reliability.
High-speed MICROCHIP low-side MOSFET driver. 500mA peak output, 35ns delay, AEC-Q100 qualified for automotive and motor control.
High-speed low-side gate driver for MOSFETs, 4.5V-18V supply, 1.4A output, SOT-23 package from ONSEMI.
Texas Instruments LM3478 low-side MOSFET controller IC, 1A, VSSOP-8. Current mode control for boost, flyback and SEPIC switching regulators.
Texas Instruments NPN Darlington transistor array, 50V, 500mA. Features integrated suppression diode for inductive loads. Ideal for motor & relay drivers.
VISHAY ESD protection device in compact SOT-23 package, 16V 480W variant, for protecting data lines and I/O ports from electrostatic discharge.
TI TPD2EUSB30A ESD/surge protector for USB 3.0. 3.6V, 45W, meets IEC 61000-4-2/4-5 standards for robust circuit defence.
Add a Qwiic port to your Raspberry Pi without soldering. Ultra-compact, HAT stackable, with 3.3V regulator.
High-performance Abracon ABM8 SMD crystal. 25MHz, ±50ppm stability, 18pF load capacitance. Ideal for comms & compact electronics.
High-quality 16MHz SMD crystal, ±30ppm tolerance, 16pF load, compact 11.4mm x 4.65mm. Ideal for precision timing.
Buy FOX ELECTRONICS FX135 32.768kHz SMD crystal, 12.5pF load, ±20ppm tolerance, ultra-low profile for industrial use.
ABRACON ABS07 32.768kHz SMD crystal. Compact 3.2x1.5mm, 12.5pF load, ±20ppm tolerance. Ideal for RTCs & industrial electronics.
High-precision 25MHz SMD crystal from ABRACON. Features ±50ppm stability, 12pF load, and a -40°C to 125°C operating range.
MURATA CERALOCK 4MHz ceramic resonator with 15pF built-in capacitors. For stable clock circuits in consumer and industrial electronics.
Low-power 1Kbit serial EEPROM with Microwire interface, SOT-23 package, 2MHz clock, 3-wire I/O.
High-performance 1Mbit OTP EPROM in a DIP-32 package. Features 70ns access, low power CMOS, and 5V supply for computers and peripherals.
Texas Instruments low power instrumentation amplifier. ±1.35V to ±18V supply, 125µV offset, 800kHz bandwidth. Ideal for battery systems.
Texas Instruments low voltage audio power amplifier. Class AB, 325mW output, 4V-12V supply. Ideal for battery-operated portable devices.
Low voltage 250mW class AB audio power amplifier from Texas Instruments. 8-pin DIP, 4V-12V supply, ideal for battery operation.
TEXAS INSTRUMENTS LM211P high-speed analogue comparator (115ns, 3.5-30V) in DIP-8 package. For automation, sensing & computing.
Arduino Nano 33 IoT development board with headers. Wi-Fi and Bluetooth via ESP32 module, 6-axis IMU and 3.3V operation.
Microchip MCP73833-AMI/UN linear charge controller IC for single-cell Li-Ion and Li-Pol batteries. 10-pin MSOP, programmable charge current up to 1A.
Microchip single-cell Li-Ion/Li-Pol battery charger IC with 6V input, 4.2V/1A charge. Features load sharing & USB power source selection.
Infineon smart high side power load switch with four MOSFETs, 5.5V to 40V operation, 6.5A current limit and SOIC-20 package.
Power Integrations TinySwitch-III 15W off-line switcher IC. Features 700V MOSFET, DIP-7 package, and simple ON/OFF control. Ideal for adapters.
Texas Instruments adjustable inverting charge pump, 200mA output, 2.7V to 5.5V input, SOT-23-6 surface-mount package. Rated -40°C to +85°C.
Versatile TI LM2665 voltage converter IC. Doubles or splits voltage (1.8-11V, 40mA) with 90% efficiency. Ideal for battery-powered devices.
Versatile Whadda I/O shield for Arduino Uno with 6 relays, 6 analogue & 6 digital inputs. Stackable design for easy project expansion.
Get started with Arduino! Complete starter kit with ATmega328 board, components, and tutorial manual. Ideal for beginners.
