118278 products
Showing 18331-18360 of 118278 products
High-reliability 6.8V Zener diode in SOT-23 package. 350mW, lead-free, AEC-Q101 qualified for automation & automotive use.
FTDI RPi-HUB-MODULE USB hub and multi-interface converter for Raspberry Pi, with three USB 2.0 ports and UART, SPI, I2C, JTAG and GPIO support.
40-way male to male jumper ribbon cable, 200mm long. Ideal for PCB connections and wire harnesses. Rainbow colour coding for easy organisation.
Low power 8/16-bit AVR XMEGA microcontroller, 128KB flash, 78 I/O, 32MHz, 100-TQFP. Ideal for industrial & embedded systems.
Discover electronic components with O'Reilly Volume 2. Covers signal processing, diodes, transistors & more. Ideal for hobbyists & engineers.
Expand your Arduino Uno with the MIKROELEKTRONIKA Click Shield. Features two mikroBUS sockets for 75+ click boards. Supports 3.3V & 5V.
NXP 74HC574 high-speed octal D flip-flop with tri-state outputs. 14ns delay, 123MHz, for communications & networking. SOIC-20 package.
SEEED STUDIO BeagleBone Green dev board with 2x Grove ports. ARM Cortex-A8, 512MB RAM, 4GB storage. Ideal for IoT and prototyping.
Amec Thermasol 10x10x2mm micro-porous ceramic heatsink with pre-applied thermally conductive silicone tape. Electrically insulating.
FTDI FT600 32-bit FIFO to USB 3.0 bridge evaluation board for prototyping USB 3.0 SuperSpeed interfaces with FPGA development boards.
Microchip TC7662A DIP-8 charge pump DC-DC converter IC with 40mA output, +3V to +18V input and -3V to -18V inverted output. No inductors required.
NXP absolute pressure sensor for altimeter & barometer applications. 6-pin SIP, 15-115kPa range, analogue output. Ideal for microcontrollers.
STM 3.3V LDO voltage regulator in SOT-223 package. 800mA output, low dropout, high PSRR. Ideal for stable power in electronics.
Harwin 32-way DIL IC socket with gold-plated beryllium copper contacts. Low-profile, auto-insertable design. Sold in a 12-pack.
CamdenBoss 240V AC green neon indicator with chrome bezel & polycarbonate body. Ideal for electrical panels & industrial control.
T GLOBAL 1.5mm carbon gap filler sheet for electronics. Provides 3.2W/m.K thermal conductivity, electrical insulation & shock absorption.
BERGQUIST Sil-Pad 400 thermally conductive sheet (300x300mm). Provides 0.9W/m.K thermal conductivity and 3.5kV electrical isolation.
Professional two-part epoxy adhesive. Thermally conductive (0.836 W/m·K) & electrically insulating. Replaces mechanical fastenings.
BOYD PF436G aluminium heatsink for TO-220 devices. 25°C/W thermal resistance, horizontal mount, black anodised finish.
BOYD aluminium heatsink for TO-220/218/247 packages. Thermal resistance 8.6°C/W, with solderable tabs. Ideal for power electronics cooling.
Vertical aluminium heatsink for TO-220 packages. 3.8°C/W thermal resistance, black anodised finish, 33mm x 43mm.
DIODES INC. ZTX451 NPN silicon bipolar transistor. 1A, 60V, E-Line package. For power management and industrial circuits.
STMicroelectronics VNB35N07TR-E N-channel Power MOSFET, 80V, 18A, TO-263 (D2PAK) with integrated thermal, current and overvoltage protection.
Vishay N-channel power MOSFET rated 500 V and 8 A in TO-220AB through-hole package. Suited to SMPS and motor control designs.
Infineon N-Channel CoolMOS Power MOSFET, 800V, 11A, 0.39 ohm, TO-220FP through hole mounting for high efficiency power conversion.
St MicroElectronics STP12NM50 N-channel MOSFET: 550V, 12A, 0.35 ohm on-state resistance, TO-220 through-hole package for power conversion.
Onsemi FDD4243 P-Channel MOSFET, 40V, 14A, 0.044 Ohms RDS(ON) in a TO-252 (DPAK) surface-mount package for power switching applications.
AEC-Q101 qualified VISHAY BYW56 diode. 1kV, 2A, with avalanche protection for industrial & automotive surge and rectification circuits.
Broadcom 2-digit red 7 segment LED display (14.2mm). Features common anode, ±50° viewing angle & high contrast. Ideal for indoor use.
Durable 15-inch 5-wire resistive touch panel by HIGGSTEC. Ideal for metering, test measurement and automation. Stable, accurate & long lifecycle.
