121215 products
Showing 14011-14040 of 121215 products
ONSEMI NCP1117DT50G 5V/1A fixed LDO regulator. Low dropout, high accuracy & full protection. Ideal for power management.
STMICROELECTRONICS 7812 fixed 12V, 100mA linear voltage regulator in SOT-89-3 package. Ideal for low-power PCB designs.
Fixed 5V, 1.2A LDO voltage regulator from STMicro. High PSRR, 350mV dropout, 2.5-18V input. Ideal for SMPS & DC-DC post-regulation.
Precise 3.3V MICROCHIP voltage reference IC in SOT-23-6 package. Features 0.1% accuracy, 50ppm/°C temp coefficient for stable analogue circuits.
Adjustable DC-DC step down regulator by TEXAS INSTRUMENTS. 5.5V-36V input, 31V/3A output, 95% efficiency. Surface mount.
TI TLV70233DBVR fixed LDO regulator: 3.3V, 300mA, 260mV dropout, low quiescent current, ideal for battery devices.
Texas Instruments 2.5V precision shunt voltage reference IC. AEC-Q100, SOT-23, no output capacitor needed. For portable & automotive use.
Texas Instruments 1A adjustable buck regulator IC. 6.5-40V input, 1.21-37V output, 260kHz, SOIC-8 package. For power management.
Texas Instruments LM1117 adjustable LDO voltage regulator. 2.6-15V in, 1.25-13.8V/800mA out, SOT-223 package. Ideal for power management.
Texas Instruments synchronous buck step-down regulator, fixed 3.3V output, 1A, 3V-17V input, WSON-8 package. Ideal for portable devices.
Precision LM4041 series voltage reference IC in SOT-23 package. Adjustable from 1.233V to 10V, low noise, no capacitor required.
Diodes Inc. AP63300WU-7 synchronous buck converter. 3.8-32V input, adjustable 0.8-31V output, 3A current. Low-EMI design for power supplies.
Beginner-friendly SparkFun Arduino kit with RedBoard Qwiic. Build 11 circuits with no soldering. Includes guide, sensors & components.
Compact WINSTAR 8x32 character LCD module with white on blue STN display and LED backlight. Ideal for control panels and instrumentation.
Compact 3.3V relay HAT for Raspberry Pi Pico. Control AC/DC devices with 2 channels. Stackable design with LED indicators.
Bourns TBU-CA series SMD high-speed bidirectional surge protector. 300V AC, 1 pole, PCB surface mount. Protects against overvoltage & lightning.
LITTELFUSE SMBJ unidirectional TVS diode, 5V standoff, 9.2V clamping. Surface mount DO-214AA for ESD & EFT protection in electronics.
Microchip 16-bit I/O Expander with I2C interface, 1.8V-5.5V supply, and SSOP package. Ideal for signal processing and consumer electronics.
High-performance AVR 8-bit microcontroller with 8KB flash, 512B RAM/EEPROM, 20MHz, DIP-14. Ideal for power-efficient designs.
Low-power AVR ATmega328 MCU: 32KB flash, 20MHz, 32-pin TQFP, 1.8-5.5V, -40°C to 105°C. Ideal for embedded systems.
74HC4538D dual retriggerable monostable multivibrator, 2-6V, 24ns, SOIC-16 for timing and pulse control.
ONSEMI NC7S08M5X CMOS AND gate. High speed (3.5ns), low power (<1µA), wide 2-6V range. Ideal for industrial & digital logic designs.
STMICROELECTRONICS 3.3V TVS diode for ESD protection. 200W pulse power, unidirectional, DO-216AA package. For portable electronics.
TI SN74LVC2T45 bus transceiver for 1.65V-5.5V logic level translation. Low power, 3.9ns delay, VSSOP-8 package. For industrial & consumer use.
Texas Instruments 74HC04 hex inverter IC. 6 gates, 2-6V supply, low power. For communications, consumer electronics & metering.
Texas Instruments 3.3V LDO regulator, 800mA output, 1.2V dropout. Features current limiting & thermal shutdown for stable power management.
High-speed bidirectional TVS diode by Wurth Elektronik. Ideal for USB 2.0, Ethernet & PoE. Features low clamping voltage & SOT-23 case.
High-quality Multicomp PRO LED Light Bar Graph Array with 20mA forward current and 30mcd luminous intensity. Ideal for signal and level indication.
Monitor temperature, humidity, air quality & eCO2 with Kitronik Board for Raspberry Pi Pico. Includes OLED display
Control two DC motors or one stepper motor with this Whadda UK L298N Arduino controller board. 25W max power, 5V-35V supply.
