Raspberry PI B+

LabBoard A+. Labbo Power Supply MicroUSB would be required(not included) unless you decide to use seperate power supply.2mm barrel in smart to switch between your power supplies. The optional atX-> power supply allow you to power your raspberry PI model with 15-24V supply. Only ATX power feature is supported for PI model B+ & PI 2 B and +5v 2A USB supply with all models except first generation model B(require 3A) specifications SoC-- Broadcom BCM2835 CPU-- 700 MHZ low power ARM. ARM11 RAM-- 256MB shared with GPU USB 2.0 Ports-- 4 Storage-- microSD size-- 85 x 56 x 17mmPower-- microUSB socket 5V 2A or via GPIO header. +5V 1A via GPIO header required for first generation model B only.GPIO-- 40-pin 2.54mm (100mil) expansion header. 27 GPIO pinsHAT ID EEPROM. When an eeprom is detected and enabled the GPIO will be setup according to the eeprom. UART Console-- enables debug and development without needing a separate monitor/keyboard. To use-- connect host USB to microUSB power (must use seperate power supply on model B first generation) and use terminal emulator at 115200-8-N-1. HDMI-- HDMI rev1.3 & 1.4 Composite RCA-- PAL and NTSC format Audio output-- 3.5mm jack with composite video. LAN-- 10/100 wired ethernet RJ45 (optional on model A/A+)