117528 products
Showing 14431-14460 of 117528 products
Broadcom 1-channel phototransistor optocoupler, 50mA, 3.75kV isolation, SOIC-4. Ideal for AC input and signal isolation.
Onsemi MOC3063-M 6-pin zero-crossing triac output optocoupler with 7.5 kV isolation and 600 V off-state voltage. DIP-6 package for 115/240 VAC control.
4-channel phototransistor optocoupler in SOIC-16. 50mA forward current, 3750Vrms isolation, 80V Vceo. Ideal for signal isolation.
ONSEMI FOD817ASD phototransistor optocoupler. 5kV isolation, 80% CTR, SMD DIP package. Ideal for industrial & logic interfaces.
4-channel TOSHIBA optocoupler with 3750Vrms isolation. SOIC-16 package, CTR 50-600%. Ideal for high-density SMT applications.
Broadcom 6N137-000E 10MBd digital optocoupler with 3.75kV isolation. TTL compatible, 1 channel, for noise immune circuit protection.
Compact ONSEMI MB6S 500mA bridge rectifier diode in SOIC package. Ideal for PCB mains rectification & low-power supplies with high surge absorption.
Multicomp Pro MB6S SMD bridge rectifier diode. 600V, 800mA, for mains rectification & PCBs. Surface mount, wide temp range.
Whadda Hall magnetic switch module pack of 2 with Arduino-compatible digital output, Schmitt trigger and onboard LED indicator for 5V projects.
DIODES INC. Schottky Rectifier, 40V, 10A, PowerDI 5. Ideal for power management & industrial applications. Low forward voltage drop.
High-speed VISHAY BYV27 ultrafast rectifier diode for power management & automotive applications. Low forward voltage, AEC-Q101 qualified.
270V Zener diode from VISHAY, 3.25W, SOD-57, through-hole, AEC-Q101 qualified. Fast clamping and high temp reliability.
High-speed MICROCHIP low-side MOSFET driver. 500mA peak output, 35ns delay, AEC-Q100 qualified for automotive and motor control.
High-speed low-side gate driver for MOSFETs, 4.5V-18V supply, 1.4A output, SOT-23 package from ONSEMI.
Texas Instruments LM3478 low-side MOSFET controller IC, 1A, VSSOP-8. Current mode control for boost, flyback and SEPIC switching regulators.
Texas Instruments NPN Darlington transistor array, 50V, 500mA. Features integrated suppression diode for inductive loads. Ideal for motor & relay drivers.
VISHAY ESD protection device in compact SOT-23 package, 16V 480W variant, for protecting data lines and I/O ports from electrostatic discharge.
TI TPD2EUSB30A ESD/surge protector for USB 3.0. 3.6V, 45W, meets IEC 61000-4-2/4-5 standards for robust circuit defence.
Add a Qwiic port to your Raspberry Pi without soldering. Ultra-compact, HAT stackable, with 3.3V regulator.
High-performance Abracon ABM8 SMD crystal. 25MHz, ±50ppm stability, 18pF load capacitance. Ideal for comms & compact electronics.
High-quality 16MHz SMD crystal, ±30ppm tolerance, 16pF load, compact 11.4mm x 4.65mm. Ideal for precision timing.
Buy FOX ELECTRONICS FX135 32.768kHz SMD crystal, 12.5pF load, ±20ppm tolerance, ultra-low profile for industrial use.
ABRACON ABS07 32.768kHz SMD crystal. Compact 3.2x1.5mm, 12.5pF load, ±20ppm tolerance. Ideal for RTCs & industrial electronics.
High-precision 25MHz SMD crystal from ABRACON. Features ±50ppm stability, 12pF load, and a -40°C to 125°C operating range.
MURATA CERALOCK 4MHz ceramic resonator with 15pF built-in capacitors. For stable clock circuits in consumer and industrial electronics.
Low-power 1Kbit serial EEPROM with Microwire interface, SOT-23 package, 2MHz clock, 3-wire I/O.
High-performance 1Mbit OTP EPROM in a DIP-32 package. Features 70ns access, low power CMOS, and 5V supply for computers and peripherals.
Texas Instruments low power instrumentation amplifier. ±1.35V to ±18V supply, 125µV offset, 800kHz bandwidth. Ideal for battery systems.
Texas Instruments low voltage audio power amplifier. Class AB, 325mW output, 4V-12V supply. Ideal for battery-operated portable devices.
