117528 products
Showing 14731-14760 of 117528 products
MIDAS DISPLAYS 1.92 inch OLED graphic display module, 160x128 white on black resolution. Supports SPI, I²C, 6800/8080 interfaces.
High-speed DFROBOT Gravity URM09 ultrasonic sensor with 50Hz update & I2C. Ideal for robotics and Arduino/RPi obstacle avoidance projects.
Plug-and-play UVC adaptor board for Raspberry Pi HQ Camera. USB 2.0, dual mics, auto exposure and white balance.
Monitor air quality with the Grove SGP30 sensor. Measures TVOC & eCO2 for Arduino/Raspberry Pi projects. Low power, I2C interface.
Advanced Arduino-compatible dev board with Nordic nRF52840, BT 5.0, IMU & mic for TinyML projects.
GPIO expansion board for Raspberry Pi 400. Extends all pins, has LEDs, buzzer, buttons, Grove ports, and 3.3V regulator.
KEMET SBC Series ferrite power inductor, 470µH, unshielded. Ideal for DC/DC converters, noise filters, LED lighting & power supplies.
KEMET SBC Series ferrite power inductor (33µH) with 1.1A RMS, unshielded, suitable for DC/DC converters and noise filters.
KEMET SBC Series ferrite power inductor, 3.3mH, unshielded drum core. Ideal for DC/DC converters, noise filters and LED lighting.
Kemet SBC Series 4.7µH ferrite power inductor with ±20% tolerance, 5.8A Irms and 0.02 ohm max DC resistance for DC/DC and noise filter circuits.
KEMET SBC Series 47µH ferrite power inductor, 2.3A Irms, for DC/DC converters, noise filters, LED lighting & power supplies.
KEMET 47µH ferrite power inductor for DC/DC converters & noise filters. Unshielded, 2.8A Irms, 5.2A Isat, operating to +105°C.
Kemet SBC series ferrite power inductor, 6800µH and 310 mA RMS current. Unshielded drum core for DC/DC converters and noise filtering.
Kemet SBC Series ferrite power inductor, 56µH with 1.8A RMS and 4A saturation current. Unshielded drum core for DC/DC converters and filters.
Official 27W USB-C PD power supply for Raspberry Pi 5. Unlocks high-power USB peripherals with stable 5.1V/5A output and intelligent power management.
Add 2G GSM connectivity to your Raspberry Pi with the SB Components PiTalk HAT. Make calls, send SMS, and connect IoT devices without WiFi.
Secure your PC or microcontroller with the SB Components USB Fingerprint Board. Features Nuvoton MCU, Cortex M23 security & 508dpi resolution.
Infineon 55V, 4.7A dual N-channel MOSFET in SO-8 package. Low 0.043ohm Rds(on) for efficient power switching in converters & motor drives.
Protect your Raspberry Pi 5 with the Cyntech Aluminium Armour Case in Black. Features dual PWM fans and silicone heatsinks for optimal cooling.
IP65 rated 12V LED panel indicator light from AB COMPONENTS. 22mm panel cut-out, green illumination, for industrial control & machinery.
Nexperia 74HCT08 quad 2-input AND gate IC in SOIC-14 package. 4.5-5.5V operation, for industrial & digital logic circuits.
ON Semiconductor FIN1001 LVDS differential driver, SOT-23, 5-pin. High-speed, low power, ideal for consumer electronics.
Single 1-input inverter, 1.65-5.5V, Schmitt trigger, SOT-353. Ideal for mixed-voltage & power-down apps.
Microchip MCP2562-E/P CAN transceiver IC, PDIP-8, up to 1Mb/s. ISO-11898-2 and ISO-11898-5 compliant for automotive and industrial networks.
Microchip KSZ8081RNBIA 10BASE-T/100BASE-TX Ethernet PHY transceiver IC in a 32-pin QFN package with RMII and MDIO interface.
4-Channel low noise operational amplifier by Texas Instruments. 3MHz bandwidth, 7V-36V supply, SOIC-14 surface mount.
Texas Instruments 4-bit bus transceiver with voltage level shifting, 3.1ns delay, and Ioff for power-down. Ideal for industrial & portable devices.
DIODES INC. synchronous buck converter: 3.8-32V input, 5V output, 2A, TSOT-26, EMI reduction for reliable power.
Expand your Raspberry Pi 5 with the 52PI M02 Mini PCI-Express HAT. High-speed PCI-Ex interface for network cards and more.
Broadcom HCNW136-000E high-speed optocoupler with 3.75kV isolation. 8-pin DIP, TTL compatible, 1Mb/s. Ideal for power supplies & logic isolation.
