117528 products
Showing 16321-16350 of 117528 products
Cytron Maker Pi RP2040 robot controller with ARM Cortex M0+, DC motor driver, Grove connectors & CircuitPython. Ideal for robotics.
High-voltage Class D MOSFET driver with floating PWM, up to 500W output, for home theatre, stereo, and powered speakers.
Texas Instruments high-speed analogue comparator featuring 7ns propagation delay, rail-to-rail output, and internal hysteresis. Suited for power management.
High-side current shunt and power monitor in SOT-23-8 package with I²C interface, 0 to 26 V bus voltage sensing and programmable calibration.
STMicroelectronics TDA7377 class AB quad audio power amplifier IC, 20W, 8V to 18V supply, for in-car audio systems and car radio designs.
Microchip TC1044SCPA DC-DC charge pump IC. Converts 1.5-12V input to -1.5 to -12V output, 20mA, 98% efficient, DIP-8 package.
Power Integrations LNK305PN off-line switcher IC in DIP-8 package, with 700V MOSFET and up to 360mA output for 85-265V AC universal input designs.
Infineon BTS50085 high side power switch, 58V, 90A, TO-220-7. AEC-Q100 qualified for automotive & industrial use.
Infineon BTS6163D high‑side power FET switch, 80A, AEC‑Q100 qualified. For automotive, power management & industrial control.
Fully protected STMicroelectronics OMNIFET II low-side MOSFET switch. 18V, 5A, 0.2ohm in TO-252 package. Ideal for harsh environments.
Texas Instruments LM5116 synchronous buck controller for 6V-100V input, 1MHz, 98% duty cycle. Ideal for high-voltage power conversion.
STMicroelectronics universal electronic fuse, 4A, 8V-48V, programmable overcurrent/voltage protection, HTSSOP package.
1.28-inch round IPS display with joystick for Raspberry Pi Pico. Ideal for gauges, interfaces, and wearables. SPI interface, 240x240 resolution.
Precision 2.5V shunt voltage reference from DIODES INC. Low power, stable with no external capacitor. Ideal for portable & test equipment.
Microchip voltage supervisor in SOT-23-5 with 2.9 V reset threshold, 1 µA typical supply current and -40°C to +125°C operating range.
Microchip fixed 2.5V LDO voltage regulator with 250mA output, 178mV dropout & 1.6µA current. SOT-23-3 package for battery & portable devices.
Fixed 12V LDO regulator, 150mA, low quiescent current, SOT-23-5 package. Ideal for industrial and consumer power management.
RÖHM 1A LDO voltage regulator with 8V fixed output & 300mV dropout. Features over-current, thermal & over-voltage protection. TO-252 package.
MICROCHIP 1.2MHz DC-DC boost regulator IC. 2.5-10V input, adjustable to 34V output, 1A current. SOT-23-5 package.
Compact MICROCHIP buck regulator IC. Adjustable 2-15V output from 4-30V input, 0.6A, 500kHz, AEC-Q100 qualified for automotive use.
STUSB4500QTR USB PD sink controller (up to 100W), auto-run, dead battery mode, protections up to 28V.
Adjustable DC-DC step-up regulator, 3-18V input, 1.2A output, 1.2MHz switching, WSON-6 package.
Fixed linear voltage regulator from Texas Instruments. 5V output, 500mA current, 7V-25V input. Ideal for power management and portable devices.
Precision LM4041 series voltage reference IC in SOT-23 package. Adjustable from 1.233V to 10V, low noise, no capacitor required.
Texas Instruments MC34063A DC-DC switching regulator IC in SOIC-8 package. Supports buck, boost and inverting topologies, with 1.5 A output switch.
Texas Instruments fixed LDO voltage regulator with 10V output and 500mA maximum load current in a compact SOT-223-3 surface-mount package.
Precision supervisor IC with 4.55V threshold, active high/low outputs, SOIC-8 package. Supply range 3.5V to 18V. Ideal for reset circuits.
TEXAS INSTRUMENTS 2.5V precision voltage reference IC. Features 0.2% accuracy, 50µA IQ, 1mV dropout & SOT-23 package for portable devices.
STMicroelectronics STM809SWX6F reset IC. Monitors 1.2V-5.5V supplies with a 2.93V threshold, active-low output. SOT-23-3 package.
Official red & white plastic case for Raspberry Pi Zero V2. Includes 3 lids, ribbon cable & feet. Compact, stylish protection.
