Showing 34381-34410 of 116019 items
Multicomp Pro
Multicomp PRO IP67 RF cable assembly. 90° U.FL plug to RP-SMA bulkhead jack. Low-loss 50 ohm micro coax.
Multicomp Pro 100mm RF cable assembly with 90° MCX plug & SMA bulkhead jack. 50 Ohm for connecting radio modules to panels.
Pro Signal
Extend loudspeaker leads with this Pro Signal UK female-to-female coupler. Features a locking joint and accepts both 2 and 4-pole plugs.
Ideal-Tek
Restore clean flush cuts with the IDEAL-TEK replacement RJ45 feed-thru crimp tool blade. Quick swap design keeps your crimper like new.
Clever Little BOX
Connect TRRS audio without soldering using the 3.5mm 4-pole jack to terminal block adaptor from Clever Little BOX. Ideal for prototyping and repairs.
WAGO
WAGO 2773 Series splicing connector set with 530 pieces in an L-Boxx case. Ideal for first-fix and junction box work.
WAGO 2-way insulated jumper for safe electrical links between terminal blocks. Easy push-in fit, 22mm wide.
WAGO 35mm DIN rail terminal block with push button & test port for 22-12AWG. Rated 800V/24A for neutral distribution.
WAGO 3-conductor terminal block, 800V, 41A, push button and test port for 20AWG to 8AWG wires. Ideal for neutral distribution.
WAGO 3-conductor terminal block with lever & push-in clamp for 35mm DIN rail. Rated 800V, 41A, for 20AWG-8AWG wires. Tool-free installation.
WAGO 3-conductor lever terminal block for 35mm DIN rail. Push-in cage clamp for 22-12AWG, 800V, 24A. Ideal for neutral distribution.
Neutrik
Panel-mount 8-pole Speakon male connector for high-power audio systems. Securely carries multi-channel speaker feeds in amps & cabinets.
Speedy RJ45
Protect RJ45 connectors & extend cable life with SPEEDY RJ45 Cat6 strain relief boots. Prevents latch breakage & relieves termination stress.
Proception
Crimp coax sockets in 75 Ohm, pack of 50. Reliable for TV and satellite terminations. Bulk buy for projects.
IEC push-on coax plug, 75 Ohm. Quick-fit connector for terminating TV aerial down-leads in domestic and trade installations.
PROCEPTION UK 90-degree F type adaptor for neat satellite/aerial cable routing behind TVs & wall plates. Compact, low-profile design.
Rean
REAN 5-pole XLR socket with IP65 rating and chrome finish for reliable DMX and audio connections outdoors.
Edac
Compact EDAC 3-way vertical PCB mount header with 2mm pitch. Ideal for space-saving board connections, mating with crimp housings.
Low-profile EDAC 5-way SMT header with 2mm pitch & right-angle design for compact, high-density PCB edge connections.
Waterproof WAGO gel box for 221 & 2273 Series connectors. 6mm size 2 housing protects splices from moisture in tough environments.
TUK
Pack of 50 metal-shielded RJ45 plugs for Cat6a & Cat7 cables. Guards against EMI for reliable high-speed networking in industrial settings.
TE Connectivity
Black TE Connectivity 4-way, 2-row receptacle socket housing. 10.16mm pitch, accepts crimp contacts for robust wire-to-board power connections.
Reliable crimp contact pin for 16 AWG conductors. Ideal for power connections and cable assemblies.
Molex
MOLEX 22 AWG pre-crimped lead (450mm) with 1.8mm socket to bare wire end. Ideal for reliable, custom electrical connections.
MOLEX pre-crimped Squba lead with 1.8mm pins & 22 AWG wire. Production-ready for fast harness assembly with zero crimping.
Ready-assembled Molex 6-pin Squba plug to plug lead. Links six-way Squba socket headers and removes harness assembly effort entirely.
Molex / Brad 4-pin Squba socket to bare end lead with 3.6mm pitch. Factory-fitted socket with open tail for flexible termination.
6-pole PicoBlade socket to bare end lead, 1.25mm pitch, 150mm. Factory-quality termination for camera modules and control boards.
Bulgin
Bulgin power entry module with C14 inlet, double-pole switch & twin fuses. 10A 250V AC rating for simplified, compliant mains wiring.
Protect unplugged Bulgin Buccaneer PXP4011 connectors from dirt and moisture with this compact sealing cap.
