Showing 34801-34830 of 116014 items
Streetwize
Secure loads with the Streetwize 5m ratchet tie down strap. Ideal for trailers, roof racks & vans. Reliable tensioning mechanism.
TUK
Single gang faceplate for 2 euro-style modules. Flame retardant, UV stable ABS in high gloss white. Supplied with screws. 86x86x10mm.
Multicomp Pro
Robust IP65-rated polycarbonate enclosure for industrial use. Dust-tight and water-protected housing for electronics.
CE-TEK
Secure your electronics with a CE-TEK ABS IP65 rated enclosure. Dust-tight, water-resistant, with captive screws. Ideal for industrial & hobbyist use.
AMPHENOL
AMPHENOL 75 Ohm BNC right angle PCB jack with gold-plated contacts. Ideal for RF communications, supports up to 2GHz.
Neutrik
75-ohm isolated BNC feedthrough for 4K/8K video. Metal D-shaped housing for panel mount. Reliable for SDI & UHD.
Pro Signal
BNC plug to BNC plug adaptor from Pro Signal UK. Joins socket-ended leads or converts genders in-line for video, CCTV, test.
Speedy RJ45
Secure your network with Speedy RJ45 Category 6 SpeedyLock Boots. Tamper-resistant, snag-less design for Cat 6 and 6a patch cords.
Webro
DIY WEBRO TV coax plug & socket kit for easy aerial extensions. Screw-on, no tools needed. Ideal for home TV & satellite setups.
Ideal-Tek
IDEAL-TEK RJ45 Cat5e feed-through plugs. Pass-through design for easy alignment and crimp-and-trim for reliable terminations.
Clever Little BOX
Reliable 9 pin D-sub plug with screw termination. Rated 30Vdc/0.5A, -40°C to 85°C. Compact and sturdy for custom wiring.
Durable nylon backshell for DE 9-pin connectors. Snap-fit hood protects terminations, with colour coding for cable identification.
Compact 1.27mm half-pitch pin header, 2x20 way vertical. Saves PCB space for board-to-board & ribbon cable interfaces. 33x15x43mm.
Multicomp Pro D-sub 15-way terminal block interface. Converts DA-15 to screw terminals for clean, serviceable control wiring. DIN rail mount.
4-way 5.08mm PCB terminal block with screw clamp, accepts 26-12 AWG. Reliable for power & signal on PCBs.
Bulk pack of 100 MULTICOMP PRO female push-on crimp terminals for 6.3mm tabs. Insulated, colour-coded for 0.5-1.5mm² wire.
Professional 25mm² tinned copper crimp terminal lug for M6 studs. Ideal for heavy-duty electrical connections in industrial & automotive applications.
Multicomp Pro 4mm stackable banana plug, 24A. Features a stackable rear socket and colour coding for easy identification of common lines.
Multicomp PRO IP67 RF cable assembly. 90° U.FL plug to RP-SMA bulkhead jack. Low-loss 50 ohm micro coax.
Pre-terminated RG178 RF pigtail with SMA plug and free end. 50ohm, 140mm brown cable for custom RF connections and tight routing.
Pack of two 3-pin XLR DMX terminators from Pro Signal UK. Prevents signal reflections, flicker & glitches in lighting control chains.
Professional IDEAL-TEK RJ45 feed-thru connector kit for Cat5e/Cat6 cables. Includes plugs, boots & blade for fast, reliable network terminations.
Clever Little BOX RJ45 to 8-pin screw terminal adaptor for easy network testing and custom wiring without crimping.
WAGO
Tool-free WAGO 2-conductor DIN rail terminal block with push-in clamp. Rated 500V/13A, for 16-24AWG wire. Fast, reliable control panel connections.
WAGO 2-conductor push-in terminal block with release button. Rated 800V/17.5A for 22-14AWG wire. Blue housing for neutral wiring.
WAGO 35mm DIN rail terminal block with push button & test port for 22-12AWG. Rated 800V/24A for neutral distribution.
WAGO green ground terminal block with 3 conductors, push button & test port. Rated 800V, 41A for 20-8AWG wire. Tool-free operation.
WAGO 3-conductor terminal block with lever & push-in clamp for 35mm DIN rail. Rated 800V, 41A, for 20AWG-8AWG wires. Tool-free installation.
WAGO 3-conductor ground terminal block with lever clamp for 35mm DIN rail. Tool-free wiring for 22-12AWG cables, ideal for panels.
Secure 8-pole SpeakOn male plug connector in black. Locking latch for reliable high-current audio connections.
