Showing 5821-5850 of 116085 items
Ween
Ween Semiconductors 4Q Triac, 800V, 25A, TO-220AB. Planar passivated for high noise immunity & motor control switching.
Littelfuse
Sensitive gate TRIAC with 600V blocking voltage, 4A RMS current, TO-225 package. Ideal for AC control.
St MicroElectronics
Overvoltage-protected 600V/800mA Triac switch in TO-92 package. For AC switching in appliances & industrial controls. Reduces component count.
Microchip
Low-power Microchip MCP6004 quad op-amp. 0.6V/µs, 1.8-5.5V, rail-to-rail I/O, AEC-Q100 for automotive.
Texas Instruments
High-performance CMOS op amp, 50MHz bandwidth, rail-to-rail I/O, low offset. Ideal for ADC driving and portable electronics.
TEXAS INSTRUMENTS dual JFET-input op-amp in DIP-8 package. Features 3MHz bandwidth, 13V/µs slew rate, and wide 7-36V supply for audio & control.
Low-power MICROCHIP MCP6001 op-amp. 1MHz bandwidth, 1.8-6V supply, rail-to-rail I/O in SOT-23 package. Ideal for automotive & portable devices.
Broadcom
Broadcom opto-isolated amplifier with 3.75kV isolation, 100kHz bandwidth, and high accuracy for industrial use.
Precision BROADCOM optical isolation amplifier for motor drives. 300µV offset, 3.75kV isolation, 15kV/µs noise rejection. DIP-8 package.
VISHAY
VISHAY 1-channel phototransistor optocoupler in DIP-4 package. Features 5.3kV isolation, 60mA forward current & fast switching for signal isolation.
Broadcom 1-channel phototransistor optocoupler, 50mA, 3.75kV isolation, SOIC-4. Ideal for AC input and signal isolation.
Onsemi
6-pin zero-crossing optocoupler with 7.5kV isolation, 600V off-state. Ideal for industrial & consumer AC control.
4-channel phototransistor optocoupler in SOIC-16. 50mA forward current, 3750Vrms isolation, 80V Vceo. Ideal for signal isolation.
ONSEMI FOD817ASD phototransistor optocoupler. 5kV isolation, 80% CTR, SMD DIP package. Ideal for industrial & logic interfaces.
Toshiba
4-channel TOSHIBA optocoupler with 3750Vrms isolation. SOIC-16 package, CTR 50-600%. Ideal for high-density SMT applications.
Broadcom 6N137-000E 10MBd digital optocoupler with 3.75kV isolation. TTL compatible, 1 channel, for noise immune circuit protection.
Compact ONSEMI MB6S 500mA bridge rectifier diode in SOIC package. Ideal for PCB mains rectification & low-power supplies with high surge absorption.
Multicomp Pro
Multicomp Pro MB6S SMD bridge rectifier diode. 600V, 800mA, for mains rectification & PCBs. Surface mount, wide temp range.
Whadda
Arduino-compatible Hall magnetic switch module pack. Features 5V operation, Schmitt trigger, LED indicator & 3-pin header. Pack of 2.
Diodes Inc.
DIODES INC. Schottky Rectifier, 40V, 10A, PowerDI 5. Ideal for power management & industrial applications. Low forward voltage drop.
High-speed VISHAY BYV27 ultrafast rectifier diode for power management & automotive applications. Low forward voltage, AEC-Q101 qualified.
270V Zener diode from VISHAY, 3.25W, SOD-57, through-hole, AEC-Q101 qualified. Fast clamping and high temp reliability.
High-speed MICROCHIP low-side MOSFET driver. 500mA peak output, 35ns delay, AEC-Q100 qualified for automotive and motor control.
High-speed low-side gate driver for MOSFETs, 4.5V-18V supply, 1.4A output, SOT-23 package from ONSEMI.
Texas Instruments LM3478 low-side MOSFET controller for switching regulators. 1A peak drive, 100kHz-1MHz freq, 2.97-40V input. Ideal for power management.
Texas Instruments NPN Darlington transistor array, 50V, 500mA. Features integrated suppression diode for inductive loads. Ideal for motor & relay drivers.
Compact VISHAY ESD protector in SOT-23 package. IEC 61000-4-2 compliant, AEC-Q101 qualified for robust circuit protection.
TI TPD2EUSB30A ESD/surge protector for USB 3.0. 3.6V, 45W, meets IEC 61000-4-2/4-5 standards for robust circuit defence.
SparkFun
Add a Qwiic port to your Raspberry Pi without soldering. Ultra-compact, HAT stackable, with 3.3V regulator.
Abracon
High-performance Abracon ABM8 SMD crystal. 25MHz, ±50ppm stability, 18pF load capacitance. Ideal for comms & compact electronics.
