Showing 9931-9960 of 116084 items
T Global
T GLOBAL 1.5mm carbon gap filler sheet for electronics. Provides 3.2W/m.K thermal conductivity, electrical insulation & shock absorption.
Bergquist
BERGQUIST Sil-Pad 400 thermally conductive sheet (300x300mm). Provides 0.9W/m.K thermal conductivity and 3.5kV electrical isolation.
Fischer
Professional two-part epoxy adhesive. Thermally conductive (0.836 W/m·K) & electrically insulating. Replaces mechanical fastenings.
Boyd
BOYD PF436G aluminium heatsink for TO-220 devices. 25°C/W thermal resistance, horizontal mount, black anodised finish.
BOYD aluminium heatsink for TO-220/218/247 packages. Thermal resistance 8.6°C/W, with solderable tabs. Ideal for power electronics cooling.
Wakefield Thermal
Vertical aluminium heatsink for TO-220 packages. 3.8°C/W thermal resistance, black anodised finish, 33mm x 43mm.
Diodes Inc.
DIODES INC. ZTX451 NPN silicon bipolar transistor. 1A, 60V, E-Line package. For power management and industrial circuits.
St MicroElectronics
80V, 18A protected Power MOSFET with thermal shutdown & diagnostic feedback. TO-263 package for automotive & industrial use.
VISHAY
VISHAY IRF840APBF power MOSFET: 500V, 8A, 0.85Ω, in TO-220AB package. Designed for industrial power management & conversion.
Infineon
Infineon N-Channel CoolMOS Power MOSFET, 800V, 11A, 0.39 ohm, TO-220FP through hole mounting for high efficiency power conversion.
STMicroelectronics STP12NM50 N-channel MOSFET: 550V, 12A, 0.35 ohm, TO-220, through-hole. Designed for high efficiency and reliability.
Onsemi
High-performance ONSEMI P-Channel MOSFET (40V, 14A, 0.044Ω) in DPAK package for efficient power switching and motor control.
AEC-Q101 qualified VISHAY BYW56 diode. 1kV, 2A, with avalanche protection for industrial & automotive surge and rectification circuits.
Broadcom
Broadcom 2-digit red 7 segment LED display (14.2mm). Features common anode, ±50° viewing angle & high contrast. Ideal for indoor use.
Higgstec
Durable 15-inch 5-wire resistive touch panel by HIGGSTEC. Ideal for metering, test measurement and automation. Stable, accurate & long lifecycle.
BROADCOM SFH756V IR emitter with 660nm wavelength, 10Mbaud data rate, and TosLink connector for polymer optical fibre.
BOYD undrilled aluminium heatsink, 50 x 29.5 x 11mm, black anodised finish. Suitable for TO-218 & TO-220 devices.
High-reliability 6.8V Zener diode in SOT-23 package. 350mW, lead-free, AEC-Q101 qualified for automation & automotive use.
NXP
NXP octal non-inverting buffer and line driver with 3-state outputs in a SOIC-20 package. Ideal for industrial and automotive use.
Wiley
Beginner's guide to Arduino with step-by-step projects. Learn electronics, programming, and build robots, automations & more.
Pro Signal
High‑speed ribbon cable for Raspberry Pi Camera & Noir modules. Reliable connection for vision projects, security cams & prototyping.
Picaxe
PICAXE 8-pin M2 microcontroller with 7KB flash, 6 I/O, 3 ADC channels, I2C, touch input support. Ideal for education & hobbyists.
4tronix
4TRONIX Pi-Stop educational traffic light module for Raspberry Pi. Plugs directly into GPIO with no extra cables required. Ideal for beginners.
NXP 74HC595 8-bit shift register in SOIC-16 package. High-speed CMOS logic with 3-state outputs for embedded design.
High-speed quad precision voltage comparator IC. 1.3µs response, 2-36V supply, open-collector output in SOIC-14 package for versatile designs.
Amec Thermasol
Low-profile AMEC THERMASOL ceramic heatsink (15x15x2.5mm) with silicone tape. Non-conductive, high surface area for consumer electronics.
FTDI
Evaluation board for FT601, bridging 32-bit FIFO to USB 3.0. Supports SuperSpeed, FMC/HSMC, multiple voltages.
Versatile STMICROELECTRONICS MC34063A DC-DC converter controller IC for buck, boost & inverting power supplies. SMD SOIC-8 package.
NXP dual port differential pressure sensor IC, 0-10kPa range, 6-pin SIP package. Ideal for medical, automation, and consumer electronics.
STMICROELECTRONICS 7805 5V fixed voltage regulator. Through-hole, 100mA output with thermal & short-circuit protection. No external components needed.
