118278 products
Showing 13501-13530 of 118278 items
Precision adjustable shunt regulator (2.5-20V) with 1% accuracy & ±55ppm/°C stability. Ideal SMT replacement for zener diodes.
Microchip 3.3V low quiescent current LDO voltage regulator in 3-pin SOT-89 package, with 250mA output and 2.3V to 6.0V input range.
Microchip 3.3V 250mA LDO regulator in SOT-89-3 package. 2.7V to 13.2V input and 2µA typical quiescent current for battery-powered designs.
Diodes AP1509-33SG-13 buck converter IC with 3.3V fixed output, 2A load capability, 4.5V to 22V input and SOIC-8 surface-mount package.
Renesas 300nA nano power voltage reference with a fixed 1.5V output in a SOT-23 package. Suitable for portable devices & power management.
Microchip adjustable LDO voltage regulator featuring 26V max input, 3A output, and fast transient response. Ideal for automotive & portable devices.
ONSEMI LDO voltage regulator: 1.8V fixed output, 250mA, 180mV dropout. Wide 1.9-5.5V input, SMD XDFN-4 package. For stable power in electronics.
ON Semiconductor fixed 3.3V LDO regulator. 300mA output, 235mV dropout, 1.7-5.5V input. TSOP-5 SMD package for stable power.
High-efficiency Texas Instruments DC-DC boost step-up regulator. 2.9-18V input, adjustable up to 38V output, 3A current, 2.2MHz. Surface mount HTSSOP-14.
Texas Instruments UA78M33QDCYRG4Q1 fixed 3.3V linear voltage regulator, 500mA output, 5.3V to 25V input, SOT-223-4 surface-mount package.
Texas Instruments LM4040 series precision micropower shunt voltage reference. AEC-Q100 qualified, no external capacitor required. SOT-23-3 package.
Adjustable synchronous buck regulator by Texas Instruments. 4.5V-28V input, 0.6V-26V output, 2A. Ideal for industrial & consumer electronics.
Low dropout voltage regulator, 12V fixed output, 1A current, SOT-223-3. Ideal for industrial & automotive use.
Texas Instruments TPS3823-33DBVR supervisor IC in SOT-23-5 with 200 ms reset delay and watchdog timer for DSP and processor systems.
TEXAS INSTRUMENTS 2.5V precision voltage reference IC. Features 0.2% accuracy, 50µA IQ, 1mV dropout & SOT-23 package for portable devices.
Precise 3.3V fixed LDO regulator by TOREX. 200mA output, low dropout, low power. SOT-23 package.
Connect full-size USB devices to your Raspberry Pi Zero with this compact OTG adaptor. Supports data and power.
High-contrast 16x2 OLED display module, white on black, 5V interface. Compact and reliable for industrial use.
Single-channel 5V Relay HAT for Raspberry Pi Pico. Supports 7A/250V AC, 10A/30V DC. Optoisolated, stackable design.
AEC-Q101 qualified SOT-23 Schottky diode. 70V, 15mA, fast switching, lead-free. Ideal for compact, reliable circuit design.
Microchip MCP23X17 16-bit SPI I/O expander. 10MHz, 25mA drive, cascadable. Ideal for embedded & automation projects. PDIP-28 package.
Add 8 I/O ports via I2C with the Microchip MCP23008 expander. 25mA drive, 1.8-5.5V, for industrial & embedded systems.
Microchip MCP2562FD CAN FD transceiver IC, 8Mbps, SOIC-8, with VIO pin and AEC-Q100 Grade 0 qualification for automotive and industrial networks.
NEXPERIA 74HCT245D SOIC-20 octal transceiver for bidirectional bus interface. Features 3-state outputs, 4.5-5.5V operation.
NXP CAN transceiver for 24V systems, up to 1MBd. Ideal for trucks and buses with thermal protection and slope control.
ONSEMI low power 2-port USB 2.0 DPDT analogue switch. 480Mbps data rate, 10-lead MSOP. Ideal for notebooks, cameras & LCD monitors.
STMicroelectronics LSM6DSL iNEMO module with 3D accelerometer & gyroscope. Low power, smart FIFO, IoT ready.
Quad 16-bit delta-sigma ADC by Texas Instruments. 860 SPS, I2C, low power. Ideal for sensor measurement.
Texas Instruments Quad 2-Input Positive AND Gate (74LS series). DIP 14-pin package, TTL logic, ideal for industrial & networking applications.
PCF8574N 8-bit I2C I/O expander in DIP-16 package, 2.5V to 6V supply. Open-drain interrupt output and eight quasi-bidirectional I/O lines.
