118278 products
Showing 14641-14670 of 118278 items
Protect high-speed data lines with the SEMTECH SR05 TVS diode. 20V clamping, 5V operating, SOT-143 package for ESD/EFT/surge protection.
ONSEMI SZNUP2105L ESD diode: 350W protection for 24V CAN networks. AEC-Q101, SOT-23 package. Pb-free & RoHS.
Texas Instruments TPD4E1B06 four-channel ESD protection array with 0.5 nA leakage and 0.7 pF line capacitance in a 6-pin SC-70 package.
Epson FC-135 SMD crystal at 32.768kHz with 12.5pF load capacitance and ±20ppm tolerance in a 3.2 x 1.5 mm package for RTCs and microcontrollers.
Abracon ABM3B 16 MHz SMD crystal with 18 pF load capacitance, ±20 ppm tolerance and 5 mm x 3.2 mm surface-mount package for PCB designs.
Epson FA-238 25MHz SMD crystal with 12pF load capacitance. ±30ppm stability, 3.2x2.5mm size. For portable & industrial electronics.
ABRACON 3.2x2.5mm SMD crystal oscillator, 50MHz, 3.3V, ±25ppm stability. For communications, computing & portable devices.
ABRACON 12MHz ultra-miniature SMD crystal, 3.2 x 2.5mm, 30ppm stability, 10pF load. Ideal for comms, wireless & high-density applications.
ABRACON ABS07 32.768kHz SMD crystal. Compact 3.2x1.5mm, 12.5pF load, ±20ppm tolerance. Ideal for RTCs & industrial electronics.
ABRACON 32.768 kHz SMD crystal (3.2mm x 1.5mm) with 6pF load capacitance and 30ppm tolerance. Ideal for communication & industrial applications.
SITIME TCXO 32.768kHz oscillator with 5ppm stability, 1uA ultra-low power, and LVCMOS output. Ideal for smart meters and RTC clocks.
Microchip 2Kbit I2C EEPROM with preprogrammed 48-bit EUI-48 node identity, in a 5-pin SOT-23 surface-mount package for compact designs.
STMICROELECTRONICS 2 Mbit I2C serial EEPROM with 4M write cycles, 200-year retention. 1.8-5.5V supply, -40°C to 85°C.
STMicroelectronics TDA7296 60W Class AB DMOS audio power amplifier IC with 15-pin MultiWatt package, mute, standby and protection features.
Texas Instruments current sense amplifier in a 5-pin SOT-23 package with 100 V/V gain and 2.7 V to 5.5 V supply for high-side and low-side sensing.
Texas Instruments TL072ID dual JFET-input op-amp. Features 3MHz bandwidth, 13V/µs slew rate, 7-36V supply & low noise for audio & signal processing.
Texas Instruments LM2903P dual differential comparator, 2V-36V, 300ns, DIP-8, low power, TTL/CMOS compatible.
Arduino Oplà IoT Kit: 8 smart projects, MKR Wi-Fi 1010 board, sensors included. Control devices via mobile.
Microchip MCP73811T single-cell Li-Ion and Li-Polymer charge controller in SOT-23-5 package, 450mA charge current and 4.2V charge voltage.
Nexperia current regulator, 15 μA to 50 mA adjustable output, 75V supply, SOT-353 package. Single-chip constant current source.
EcoSmart™ AC/DC converter IC, 85-265VAC, flyback, 34W, DIP-11, with over-voltage & thermal protection.
Power Integrations TOPSwitch-GX 210W AC/DC converter IC in TO-220-6 package. Flyback topology with 85V AC to 265V AC input range.
Texas Instruments adjustable step-down DC-DC converter. 2.5V-6V input, 0.8V-6V output, 2A current, 2.4MHz, µSIP-8.
TEXAS INSTRUMENTS 60mA charge pump voltage inverter. 1.6V to 5.5V input, -5.25V to -1.6V output in a SOT-23-5 package.
Powerful Whadda UK ATmega2560 development board, fully Arduino Mega compatible. Features 54 digital I/O pins, 16 analogue inputs & 256kB Flash.
Raspberry Pi Build HAT expansion board with four connectors for LEGO Technic motors and sensors, plus Python library support.
High-accuracy Microchip CMOS LDO voltage regulator with 3.3V fixed output, 500mA max current & 350mV dropout. Ideal for battery-operated systems.
Fixed 5V LDO regulator with 400mV dropout & 1.5A output. Wide 6-30V input range for efficient power management in SMT designs.
ON Semiconductor MAX809STRG 3-pin supervisor IC. Monitors VCC (1-5.5V), provides 460ms active-low reset. Ideal for computers, portables & embedded systems.
Microchip fixed 5V LDO voltage regulator with 250mA output. Input 2.7V-16V. Ideal for portable & industrial power management.
