118278 products
Showing 15391-15420 of 118278 items
Texas Instruments LT1054CP switched-capacitor voltage converter with regulated -5V output up to 100mA, 3.5V to 15V input, in an 8-pin DIP package.
ATmega328 development board, 100% Arduino Uno compatible. 16MHz, 14 I/O pins, 32kB flash. Ideal for projects and learning.
Compact 37.9kHz IR receiver modules (2 pack) for Arduino. Features ambient light rejection, TTL/CMOS compatibility & 3-5V DC operation.
Microchip 5V fixed LDO voltage regulator in SOT-23-3 package with 250mA output, 178mV dropout and 1.6µA typical quiescent current.
STMicroelectronics fixed & adjustable LDO voltage regulator, 5V out, 3A max, TO-220-3 package. Ideal for power management applications.
STMicroelectronics LE33CD-TR LDO regulator: 3.3V output, 150mA, low dropout, shutdown logic, ideal for power-sensitive electronics.
MICROCHIP Fixed LDO Voltage Regulator offering 3.3V output & 250mA current. Ideal for battery-powered & automotive applications.
Microchip MCP16312-E/MS 1A synchronous buck regulator with 4.4V to 30V input, 2V to 24V adjustable output and MSOP-8 package.
ONSEMI NCV1117 3.3V 1A LDO voltage regulator. ±1% accuracy, 20V max input, AEC-Q100 qualified for automotive & industrial use.
Precision 2.048V series voltage reference in SOT-23 package. 0.1% accuracy, AEC-Q100 qualified, ideal for automotive and industrial.
High-efficiency step-up boost regulator, 2.7V-14V input, 3V-20V output, 2A max, SOT-23-5, ideal for power management and embedded designs.
TEXAS INSTRUMENTS LP5907 LDO regulator: 3.3V fixed, 250mA, ultra-low noise, high PSRR. For RF & portable electronics. SOT-5 package.
Texas Instruments fixed Buck-Boost switching regulator. 1.8V-5.5V input, 3.3V / 1.2A output. Up to 96% efficiency, VSON-10 package.
TEXAS INSTRUMENTS adjustable step-down regulator. Converts 9.5-95V input to 2.5-75V output at 350mA. Ideal for industrial & automotive use.
Texas Instruments adjustable buck DC-DC converter with 500 mA output, 4.75 V to 28 V input range and compact WSON-10 surface-mount package.
TEXAS INSTRUMENTS 7905 fixed -5V linear voltage regulator. -20V to -7V input, 100mA output, TO-92-3 package. For power management.
Precision 2.5V micropower shunt voltage reference by Texas Instruments. AEC-Q100 qualified, no external capacitor needed, SOT-23 package.
Microchip high-voltage LDO regulator: 5V fixed output, 45V max input, 80mA current. For automotive ECUs, sensors & microcontrollers.
High-precision STMicroelectronics DC-DC regulator. Adjustable output, 400mA, 18V max input, over-voltage protection. Ideal for SMPS & PFC.
Connect 3.3V sensors to 5V boards safely. Whadda's breadboard-compatible logic level converter module has 2 bidirectional channels.
Prototyping board for Raspberry Pi Pico with labelled connections & 2.54mm grids. Ideal for testing circuits and building electronics projects.
ABRACON 25MHz ceramic SMD crystal. 5x3.2mm, 18pF load, ±50ppm stability. Ideal for consumer electronics & networking.
FTDI USB 2.0 to Serial UART converter IC. SSOP 20-pin, up to 3Mbaud, low power. Ideal for computing and industrial applications.
High accuracy dual 12-bit DAC with SPI interface, internal reference, rail-to-rail output, 2.7-5.5V supply, SOIC-8 package.
Microchip single key Qtouch capacitive touch sensor in SOT-23-6 package. Features 1-wire interface, 1.8V-5.5V supply, and self-calibration.
16-bit I2C I/O expander, 1.7MHz, 1.8V-5.5V, SOIC-28, low standby current. Ideal for expanding I/O in embedded and industrial applications.
NEXPERIA high-speed Si-gate CMOS octal D-type transparent latch. Tri-state non-inverted outputs, SOIC-20 package. Ideal for bus orientated apps.
NXP LM75A digital temp sensor IC. 0.125°C resolution, ±3°C accuracy, I²C interface, 2.8-5.5V range. For PC, industrial & automotive use.
SKYWORKS AS179-92LF GaAs SPDT RF switch. Low 0.3dB insertion loss, 2-5V operation, for comms & networking from 20MHz to 3GHz.
Texas Instruments SN74LVC1G11 single 3-input AND gate, SOT-23, 1.65-5.5V, low power, for portable devices.
