118278 products
Showing 15781-15810 of 118278 items
KEMET 33µH unshielded ferrite power inductor. Ideal for DC/DC converters, noise filters & LED lighting. Up to +105°C.
KEMET SBC Series ferrite power inductor, 4.7mH, unshielded. Ideal for DC/DC converters and noise filters.
KEMET SBC Series Ferrite Power Inductor, 470µH, unshielded drum core. Ideal for DC/DC converters, LED lighting & power supplies.
Official 27W USB-C power supply for Raspberry Pi 5. Features USB PD for high-power peripherals. Includes UK Type G plug.
All-in-one IoTFi RP2040 board with 2G GSM, WiFi/Bluetooth, GPS, LCD display & microSD slot for advanced prototyping and remote monitoring projects.
32 Neopixel-compatible RGB LEDs on a circular board. Individually addressable, one-wire protocol. Ideal for projects needing vibrant lighting.
ARDUINO GIGA Display Shield with 3.97 inch TFT touchscreen, 6-axis IMU, digital mic & RGB LED. For GIGA R1 Wi-Fi.
Upgrade your Argon NEO 5 case with M.2 NVMe support. Includes aluminium heatsink and supports drives up to 2280 size.
IP65 rated 12V LED panel indicator light from AB COMPONENTS. 22mm panel cut-out, green illumination, for industrial control & machinery.
Nexperia 74HC1G14 Schmitt Trigger Inverter in SOT-353 package. 2V-6V, high noise immunity, -40°C to 125°C. Ideal for wave shaping.
STMICROELECTRONICS ARM Cortex-M3 32-bit microcontroller. 72MHz, 64KB Flash, 48-pin LQFP. Ideal for motor control & embedded design.
High-performance Microchip 8-bit PIC microcontroller with 64MHz speed, 64KB flash, 25 I/O, and industrial -40°C to 85°C range in 28-pin DIP package.
Microchip USB 2.0 hub controller IC in a 36-pin QFN package (6x6 mm) with 3.3V supply, up to 480Mbps and two to four downstream ports.
STMicroelectronics 2Kbit Serial I2C EEPROM, 256 x 8bit, 400kHz, SOIC-8. Operates from 1.8V to 5.5V, surface mount, -40°C to 85°C.
Infineon 64Kbit F-RAM non-volatile memory, 8K x 8, 16MHz SPI, 3 V to 3.6 V, 8-pin SOIC. AEC-Q100 Grade 1 qualified for automotive designs.
High-speed CMOS 74HC138 decoder/demultiplexer, 8 outputs, 2V-6V supply, DIP-16 package.
1.5MHz step-up DC/DC converter by Diodes Inc. SOT-23-5 SMD, 2.6-16V input, adjustable output up to 29V. Ideal for LCD bias & LED drivers.
Durable aluminium enclosure with adjustable steel stand for Arduino GIGA R1 & Display Shield. Features 360° ball swivel & tripod mount.
Broadcom 2-channel SMD optocoupler in DIP-8 package, rated 5 kV isolation, 50 mA forward current and 130% minimum CTR for signal isolation.
IS127 1-channel Darlington optocoupler by ISOCOM. Features 3.75kV isolation, SOP 4-pin package, and 300V collector-emitter voltage.
Compact VISHAY optocoupler with transistor output, 50mA forward current, 3.75kV isolation, ideal for networking.
Low power BROADCOM red 7 segment LED display with a 7.6mm character size. Common anode connection ideal for consumer and industrial applications.
CML red LED panel mount indicator with satin chrome bezel, 8 mm mounting hole and IP67 dust-tight rating for industrial control panels.
High-reliability Dialight green PCB LED indicator with 2 LEDs, 12.6mcd intensity, and UL94V-0 rated housing. For aerospace & defence.
MENTOR 26mm transparent light pipe for panel mounting. Easy press-fit installation, UL94 rated, for industrial LED indicators.
Arduino Nano 33 BLE Rev2 with headers: nRF52840, Arm Cortex-M4, BLE, IMU. Ideal for wearables & IoT. 3.3V, 14 digital pins.
DFROBOT FireBeetle 2 ESP32-E IoT microcontroller with header. Features Wi-Fi, Bluetooth, USB-C, and low power for smart home projects.
Pimoroni BH1745 luminance and colour sensor breakout with RGB and lux detection, I2C interface and Raspberry Pi compatibility.
DFRobot 3-in-1 waterproof USB endoscope camera with 8mm head, 1200P HD, IP67 rating and 5 metre cable for confined and hard-to-reach inspection.
High-sensitivity DFRobot vibration sensor module (SEN0433) with digital output and adjustable sensitivity. Ideal for Arduino alarms.
