ARDUINO GIGA Display Shield 3.97 Inch TFT Touchscreen

The ARDUINO GIGA Display Shield provides an straightforward way to add a touchscreen display with orientation detection to your Arduino GIGA R1 Wi-Fi board. Designed without a microcontroller, this shield cannot be programmed independently and relies entirely on the host board for operation.

This shield features a 3.97-inch TFT display with a resolution of 480x800 and a pixel size of 0.108mm, delivering clear visual output for your projects. It is equipped with a 6-axis IMU, combining an accelerometer and a gyroscope with 16-bit precision, enabling precise orientation detection. An RGB LED with a common anode and an integrated charge pump driver offers visual feedback, while a digital microphone with a 64dB signal-to-noise ratio and -26dBFS ±3dB sensitivity allows for audio input.

Connectivity options include a dedicated GIGA connector and a 2.54mm camera connector for expanding your project's capabilities. The shield operates with an input voltage of 7V typical from the VIN header, with a high-level input voltage of 3.3V maximum and a low-level input voltage of 1V maximum. It is designed to function reliably within an operating temperature range of -20 to +70°C.

Specifications

• Display: 3.97-inch TFT, 480x800 resolution, 0.108mm pixel size
• IMU: 6-axis (accelerometer and gyroscope), 16-bit
• LED: RGB LED, common anode, integrated charge pump driver
• Microphone: Digital, 64dB signal-to-noise ratio, -26dBFS ±3dB sensitivity
• Connectors: GIGA connector, 2.54mm camera connector
• Input Voltage (VIN): 7V typical
• Input High-Level Voltage: 3.3V maximum
• Input Low-Level Voltage: 1V maximum
• Operating Temperature: -20 to +70°C
• Dimensions: 43 mm x 33 mm x 15 mm
• Weight: 140 grams