Dispatch closes inCutoff--:--:--

Worldwide deliveryDuties depend on destination27 locales

Woodworking Accessories

Router Bits

Check out our Router Bits range of professional tools and accessories.

257 products

Displaying 121-150 of 257 products

Trend C007 TCT Two Flute Router Cutter, 6.3mm x 19.1mm
$60.95 $29.53 at 48+
TrendTREC00714TC
Trend C007 TCT Two Flute Router Cutter, 6.3mm x 19.1mm
Precision Trend C007 TCT router cutter (6.3mm x 19.1mm) for engraving, grooving, and rebating in wood and timber-based materials.
TCT
Woodworking
Carbide
$60.95
Trend C005 TCT Two Flute Cutter 6mm x 16mm, 1/4in Shank
$62.95 $31.20 at 48+
TrendTREC00514TC
Trend C005 TCT Two Flute Cutter 6mm x 16mm, 1/4in Shank
High-performance 6mm x 16mm TCT two flute cutter with PTFE coating for clean cuts in timber and wood-based materials.
DIY Tools
Woodworking
Carbide
$62.95
Trend C002 TCT Two Flute Router Cutter, 4.0 x 11.1mm, 1/4in Shank
$96.95 $56.93 at 48+
TrendTREC00214TC
Trend C002 TCT Two Flute Router Cutter, 4.0 x 11.1mm, 1/4in Shank
Precision Trend TCT two flute cutter (4.0 x 11.1mm) for clean cuts in timber. Ideal for engraving, grooving & rebating.
TCT
Woodworking
Trend
$96.95
Trend C001 TCT Two Flute Cutter, 3.2 x 9.5mm, 1/4in Shank
$99.95 $59.35 at 48+
TrendTREC00114TC
Trend C001 TCT Two Flute Cutter, 3.2 x 9.5mm, 1/4in Shank
Precision Trend TCT two-flute cutter for woodworking. Carbide tips, PTFE coated, 3.2x9.5mm cutting size. Ideal for routers.
Woodworking
Carbide
Trend
$99.95
Trend B19 Replacement Bearing, 3/4 in Diameter, 1/4 in Bore
$33.41 $17.29 at 48+
Out of stock
TrendTREB19
Trend B19 Replacement Bearing, 3/4 in Diameter, 1/4 in Bore
Trend B19 replacement bearing for router cutters. Dust-shielded, long-lasting grease-packed. Dimensions: 3/4 in x 1/4 in.
Woodworking
Trend
Router Cutter
$33.41
Out of stock
Trend B16 Replacement Bearing - 5/8in Diameter, 1/4in Bore
$38.95 $12.68 at 48+
TrendTREB16
Trend B16 Replacement Bearing - 5/8in Diameter, 1/4in Bore
High-quality Trend B16 replacement bearing for router cutters. 5/8in diameter, 1/4in bore. Shielded & grease-packed.
DIY
Woodworking
1/4in
$38.95
Trend TCT Bearing Guided Corner Bead Cutter, 9/73 x 1/2
$258.95 $246.16 at 48+
Out of stock
TrendTRE97312TC
Trend TCT Bearing Guided Corner Bead Cutter, 9/73 x 1/2
Professional TCT bearing-guided corner bead cutter by Trend, ideal for decorative mouldings on woodwork.
Trend
Router Bit
TCT Cutter
$258.95
Out of stock
Trend 9/72 x 1/4 TCT Bearing-Guided Corner Bead Cutter, 4.8mm Radius
$238.65 $224.67 at 48+
Out of stock
TrendTRE97214TC
Trend 9/72 x 1/4 TCT Bearing-Guided Corner Bead Cutter, 4.8mm Radius
Precision TCT bead cutter for woodworking - creates decorative edges on furniture & architectural woodwork. 1/4in shank.
TCT
Woodworking
Trend
$238.65
Out of stock
Trend TCT Bearing Guided Corner Bead Cutter, 3.2mm Radius
$188.02 $181.16 at 48+
Out of stock
TrendTRE97114TC
Trend TCT Bearing Guided Corner Bead Cutter, 3.2mm Radius
Durable Trend TCT bearing guided corner bead cutter (3.2mm radius) for professional woodworking edge mouldings.
Tungsten Carbide
Woodworking
Professional Tools
$188.02
Out of stock
Trend 7E/3 x 1/4in TCT Pin Guided Round Over Cutter, 8mm Radius
$172.93 $152.66 at 48+
Out of stock
TrendTRE7E314TC
Trend 7E/3 x 1/4in TCT Pin Guided Round Over Cutter, 8mm Radius
Precision TCT pin guided round over cutter (8mm radius) for woodworking. Ideal for cabinets, table tops & more.
Woodworking
Trend
Router Bit
$172.93
Out of stock
Trend TCT Pin Guided Round Over Cutter, 6.3mm Radius, 1/4in Shank
$164.00 $152.66 at 48+
Out of stock
TrendTRE7E214TC
Trend TCT Pin Guided Round Over Cutter, 6.3mm Radius, 1/4in Shank
Precision tungsten carbide-tipped router cutter for smooth rounded edges on wood & MDF. 1/4in shank, pin-guided design.
DIY Tools
Tungsten Carbide
TCT
$164.00
Out of stock
Trend 7/01 x 1/4in TCT Ovolo & Round Over Cutter, 2.5mm Radius
$101.02 $87.55 at 48+
Out of stock
TrendTRE70114TC
Trend 7/01 x 1/4in TCT Ovolo & Round Over Cutter, 2.5mm Radius
Trend's tungsten carbide ovolo cutter (2.5mm radius) for flawless edge moulding on woodwork & MDF. 1/4in shank.
TCT
Woodworking
Trend
$101.02
Out of stock
Trend 5/1 x 1/4 TCT Hinge Recessor, 12.7 x 19mm
$115.95 $71.44 at 48+
TrendTRE5114TC
Trend 5/1 x 1/4 TCT Hinge Recessor, 12.7 x 19mm
Trend TCT hinge recessor (12.7 x 19mm) for precise woodworking. Two-flute design for efficient chip clearance.
DIY
Tungsten Carbide
TCT
$115.95
Trend 50/05 x 1/4 HSSE Helical Plunge Bit, 5mm
$89.57 $75.57 at 48+
Out of stock
TrendTRE500514HSE
Trend 50/05 x 1/4 HSSE Helical Plunge Bit, 5mm
Professional 5mm HSSE helical plunge bit for aluminium & UPVC extrusion work. Ideal for window/door fabrication.
Trend
Aluminium Cutting
HSSE
$89.57
Out of stock
Trend 4/8 x 1/2 TCT Two Flute Cutter, 25.4 x 25mm
$195.95 $128.73 at 48+
TrendTRE4812TC
Trend 4/8 x 1/2 TCT Two Flute Cutter, 25.4 x 25mm
Trend 25.4mm two-flute cutter for clean cuts in chipboard, MDF, plywood & hardwoods. Ideal for routing & drilling.
Tungsten Carbide
Woodworking
Trend
$195.95
Trend 4/80 x 1/2 TCT Two Flute Cutter, 25.4 x 37mm
$203.20 $188.99 at 48+
Out of stock
TrendTRE48012TC
Trend 4/80 x 1/2 TCT Two Flute Cutter, 25.4 x 37mm
Professional 25.4mm TCT two-flute router cutter for clean cuts in wood & plastics. Ideal for grooving, rebating & hinge recessing.
TCT
Woodworking
Professional Tools
$203.20
Out of stock
Trend 47/4 x 1/4 TCT Pierce & Trim Cutter, 6.3 x 18mm
$105.95 $63.86 at 48+
TrendTRE47414TC
Trend 47/4 x 1/4 TCT Pierce & Trim Cutter, 6.3 x 18mm
Precision TCT cutter for laminate worktops. Single flute, 6.3mm diameter, 18mm cutting length, 1/4in shank.
DIY
Trend
Precision Cutting
$105.95
Trend 4/70 TCT Two Flute Cutter, 25mm x 25mm, 1/4in Shank
$166.52 $146.83 at 48+
Out of stock
TrendTRE47014TC
Trend 4/70 TCT Two Flute Cutter, 25mm x 25mm, 1/4in Shank
Trend 25mm TCT two flute cutter for grooving, rebating & routing. 1/4in shank, suitable for wood & hard plastics.
Woodworking
Drilling
Trend
$166.52
Out of stock
Trend 4/70 x 1/2 TCT Two Flute Cutter, 25x25mm
$190.95 $124.91 at 48+
TrendTRE47012TC
Trend 4/70 x 1/2 TCT Two Flute Cutter, 25x25mm
Trend 25mm TCT two flute cutter for clean grooving, rebating & routing in wood & hard plastics.
Woodworking
Drilling
Trend
$190.95
Trend TCT 90° Shank Mounted Template Profiler 12.7 x 25.4mm
$152.95 $100.53 at 48+
TrendTRE469514TC
Trend TCT 90° Shank Mounted Template Profiler 12.7 x 25.4mm
High-performance Tungsten Carbide template profiler for precision routing. Ideal for woodworking & cabinetry.
Tungsten Carbide
Woodworking
Trend
$152.95
Trend 46/91 x 1/4 TCT 90° Shank Mounted Template Profiler, 12.7x9.5mm
$151.95 $92.41 at 48+
TrendTRE469114TC
Trend 46/91 x 1/4 TCT 90° Shank Mounted Template Profiler, 12.7x9.5mm
Trend tungsten carbide template profiler with 1/4 shank for precise routing of straight & curved edges. 90° angle, 12.7x9.5mm.
Tungsten Carbide
Woodworking
Trend
$151.95
Trend 46/82 1/2in TCT Triple Flute Cutter, 12.7x38.1mm
$219.43 $213.86 at 48+
Out of stock
TrendTRE468212TC
Trend 46/82 1/2in TCT Triple Flute Cutter, 12.7x38.1mm
Trend's tungsten carbide-tipped triple flute cutter for laminates & plywood delivers a super-fine finish and extended tool life. 1/2in shank.
Woodworking
Plywood
Trend
$219.43
Out of stock
Trend 46/80 x 1/4 TCT Triple Flute Router Cutter, 12.7 x 25.4mm
$134.95 $86.00 at 48+
Out of stock
TrendTRE468014TC
Trend 46/80 x 1/4 TCT Triple Flute Router Cutter, 12.7 x 25.4mm
Trend's TCT triple flute router cutter (12.7x25.4mm) delivers a super fine finish. Ideal for laminate & plywood. 90° bearing guided.
TCT
Woodworking
Plywood
$134.95
Out of stock
Trend 46/39 x 1/4 TCT Bearing Guided Rebate Set, 35 x 12.7mm
$238.20 $225.61 at 48+
Out of stock
TrendTRE463914TC
Trend 46/39 x 1/4 TCT Bearing Guided Rebate Set, 35 x 12.7mm
Versatile Trend TCT rebate set with four bearings for precise, adjustable rebating in woodworking.
Tungsten Carbide
Woodworking
Adjustable
$238.20
Out of stock
Trend TCT Bearing Guided Rebate Set, 35 x 12.7mm, 1/2in Shank
$257.26 $246.46 at 48+
Out of stock
TrendTRE463912TC
Trend TCT Bearing Guided Rebate Set, 35 x 12.7mm, 1/2in Shank
Versatile Trend TCT rebate set with 4 bearings for adjustable depths. Perfect for accurate wood routing tasks.
TCT
Woodworking
Trend
$257.26
Out of stock
Trend 46/390 x 1/2 Inch TCT Bearing Guided Rebater, 22.5mm x 50.8mm
$329.95 $239.50 at 24+
TrendTRE4639012TC
Trend 46/390 x 1/2 Inch TCT Bearing Guided Rebater, 22.5mm x 50.8mm
High-quality Trend TCT bearing-guided rebater for precise straight & curved rebating. Compatible with portable & stationary routers.
Woodworking
Trend
Precision Cutting
$329.95
Trend 46/37 TCT Bearing Guided Chamfer Cutter, 45°, 31.8mm
$246.95 $168.33 at 48+
TrendTRE463714TC
Trend 46/37 TCT Bearing Guided Chamfer Cutter, 45°, 31.8mm
Precision TCT bearing-guided chamfer cutter for wood, fibreboard & plastics. Ideal for professional woodworking & sign making.
TCT
Woodworking
Trend
$246.95
Trend 46/37 x 1/2in TCT Bearing-Guided 45° Chamfer Cutter
$215.63 $200.59 at 48+
Out of stock
TrendTRE463712TC
Trend 46/37 x 1/2in TCT Bearing-Guided 45° Chamfer Cutter
Precision Trend TCT bearing-guided 45° chamfer cutter for wood, MDF & plastic. Ideal for sign making, cabinetry & joinery.
TCT
Woodworking
45°
$215.63
Out of stock
Trend TCT Bearing Guided Chamfer Cutter, 46/360 x 1/2
$250.72 $238.70 at 48+
Out of stock
TrendTRE4636012TC
Trend TCT Bearing Guided Chamfer Cutter, 46/360 x 1/2
Premium tungsten carbide chamfer cutter for wood & plastic, featuring bearing guidance for precise edging and curves.
TCT
Woodworking
Trend
$250.72
Out of stock
Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm
$285.95 $206.42 at 48+
TrendTRE462312TC
Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm
Precision Trend TCT template profiler for trimming and bevelling timber & plastic laminate edges. Ideal for cabinet making & countertops.
Tungsten Carbide
Trend
TCT Cutter
$285.95

Per page