Cables & Connectors
Check out our Leads range of professional tools and accessories.
3122 products
Displaying 871-900 of 3122 products
Factory-assembled MOLEX 4-pin Squba plug-to-plug lead for reliable, time-saving board interconnections in electronics.
MOLEX / BRAD 10-pin Squba socket lead (150mm). Maximum-density ten-way interconnect, plugging directly into Squba headers. Compact & reliable.
MOLEX 6 pin Squba socket to socket lead for dense board-to-board wiring. Factory assembled to remove risk.
Connect boards in separate areas of an enclosure with the Molex 4 Pin Squba Socket to Socket Lead. Ready to plug in straight from the pack.
Ready-made Molex 2-pin Squba socket to socket lead for reliable board-to-board power. Ensures consistent termination quality.
MOLEX / BRAD Squba pre-crimped flying lead, 1.8mm pin to bare end, 22 AWG, 300mm. Ideal for custom loom work.
MOLEX pre-crimped Squba lead with 1.8mm pins & 22 AWG wire. Production-ready for fast harness assembly with zero crimping.
MOLEX 24 AWG Squba flying lead, factory-crimped with a 1.8mm terminal pin. Ideal for reliable signal wiring in compact assemblies.
Factory-crimped MOLEX lead with 1.8mm terminal pins at both ends. 22 AWG wire for reliable connections in electronics and prototyping.
MOLEX / BRAD Squba flying lead, 24 AWG, 1.8mm crimp socket to bare end, 225mm. Ideal for light signal wiring.
Molex/Brad Squba pre-crimped flying lead: 1.8mm socket to bare wire, 22 AWG, 225mm long. Ideal for reliable sensor & switch wiring.
Molex pre-crimped flying lead with 1.8mm socket contact, bare wire end and 22 AWG wire. 150 mm length for wiring harness assembly.
Pre-crimped Squba lead, 1.8mm socket to bare end, 24 AWG, 75mm. Ideal for low-current signal connections & compact assemblies.
MOLEX 22 AWG pre-crimped lead (450mm) with 1.8mm socket to bare wire end. Ideal for reliable, custom electrical connections.
MOLEX pre-crimped Squba lead with 1.8mm sockets. 22 AWG wire for fast, tool-free harness assembly into Squba housings.
65mm Multicomp Pro RF cable assembly (SMA bulkhead to 90° SMP). RG405, 50Ω. For high-frequency module interconnects.
Multicomp Pro 610mm RG316 RF cable with SMA plugs. 50-ohm, low-loss flexible interconnect for test rigs and RF modules.
Multicomp Pro 50 Ohm RF cable assembly with 90° U.FL plug to SMA bulkhead jack. Connects on-board radios to external antennas securely.
Multicomp Pro 150 mm 50 ohm RF cable assembly with SMA plug and SMA bulkhead jack. IP67-rated for dust and temporary water immersion.
200mm Multicomp Pro RF cable, SMA plug to bulkhead jack. Low-loss 50-ohm coax for secure antenna & enclosure connections.
Multicomp PRO IP67 RF cable assembly. 90° U.FL plug to RP-SMA bulkhead jack. Low-loss 50 ohm micro coax.