Electronic Components
Check out our Component Transformers range of professional tools and accessories.
1304 products
Displaying 361-390 of 1304 products
ONSEMI fixed 5V, 1A buck switching regulator with thermal shutdown. 4.75V-40V input, surface mount TO-263-5 package. Ideal for industrial use.
Onsemi fixed 12V 1A linear voltage regulator in TO-220 package. 19V to 35V input with thermal shutdown and current limiting.
Fixed 5V LDO regulator with 400mV dropout & 1.5A output. Wide 6-30V input range for efficient power management in SMT designs.
Fixed 5V LDO voltage regulator, 800mA output, SOT-223 package. Low dropout, high efficiency. Ideal for stable power supply.
Low quiescent current LDO regulator, fixed 3.3V output, 250mA, TO-92 package. Ideal for battery-powered devices.
Microchip 5V fixed LDO voltage regulator in SOT-23-3 package with 250mA output, 178mV dropout and 1.6µA typical quiescent current.
Microchip TC7662BCOA charge pump converter, 1.5V-15V input, -1.5V to -15V output, 20mA, SOIC-8. High efficiency, low EMI.
Texas Instruments TL494IN PWM controller for power supply design. 7-40V supply, 200mA output, 300kHz, in DIP-16 package.
POWER INTEGRATIONS 4W flyback AC/DC converter IC with 85-265VAC input. Isolated, SMD-8 package for compact power supplies.
Power Integrations TOPSwitch-GX 210W AC/DC converter IC in TO-220-6 package. Flyback topology with 85V AC to 265V AC input range.
Infineon BTS721L1 quad high side power switch in SOIC-20 package. 5 to 34 V input range, 85 mΩ on-state resistance and AEC-Q100 qualified.
High-efficiency 725V flyback converter IC. Features EcoSmart tech, 132kHz operation & full protection suite for adapters & power supplies.
EcoSmart™ AC/DC converter IC, 85-265VAC, flyback, 34W, DIP-11, with over-voltage & thermal protection.
INFINEON BTS4140N smart high-side power switch with 700mA current limit and AEC-Q100 qualification. Ideal for automotive and industrial loads.
Microchip TC1044SCPA DC-DC charge pump IC. Converts 1.5-12V input to -1.5 to -12V output, 20mA, 98% efficient, DIP-8 package.
Texas Instruments high-speed comparator with 4.5ns delay, 2.7-5.5V operation & rail-to-rail output. Ideal for test, wireless & sensing.
Texas Instruments LM13700 dual transconductance amplifier, 16-pin SOIC, 2 MHz gain bandwidth, with linearising diodes for signal processing.
High-side current shunt and power monitor in SOT-23-8 package with I²C interface, 0 to 26 V bus voltage sensing and programmable calibration.
High-side current sense amplifier, INA169NA/250 by TI. 2.7V-60V supply, 440kHz bandwidth, SOT-23 package.
Texas Instruments TPA3116D2DAD stereo Class-D amplifier, 2×50W into 4Ω at 21V. Supports stereo and mono modes, 4.5V to 26V supply, 32-pin HTSSOP.
Low voltage 250mW class AB audio power amplifier from Texas Instruments. 8-pin DIP, 4V-12V supply, ideal for battery operation.
Precision TI INA826AID instrumentation amplifier. Low 150µA current, 2.7-36V supply, rail-to-rail output in SOIC-8 package for industrial & portable devices.
Low-power sub-microamp comparator, 1.6V-5.5V, push-pull output, SOT-23 package. AEC-Q100 qualified.
Low-power push-pull comparator from Microchip. SOT-23, 5 pins, 1.8V to 5.5V supply, 49ns delay.
STMicroelectronics MC33078D dual low noise op-amp: 15MHz GBW, 7V/µs, ±2.5-15V, SOIC-8.
MICROCHIP 256Kbit I2C EEPROM, 1.7-5.5V, 1MHz. 8-pin SOIC with write protection, ideal for industrial & commercial data storage.
Abracon ABS07 32.768 kHz SMD tuning fork crystal, 3.2 x 1.5 x 0.9 mm, 6 pF load capacitance, ±20 ppm tolerance, for low-power timing circuits.
High-reliability ABRACON ABM8G SMD crystal. 30ppm stability, 18pF load, glass-sealed for comms, industrial & wireless applications.
ABRACON ABS07 32.768kHz SMD crystal. Compact 3.2x1.5mm, 12.5pF load, ±20ppm tolerance. Ideal for RTCs & industrial electronics.