Maker & Development
Check out our Development Boards range of professional tools and accessories.
188 products
Displaying 31-60 of 188 products
Add 2G GSM connectivity to your Raspberry Pi with the SB Components PiTalk HAT. Make calls, send SMS, and connect IoT devices without WiFi.
All-in-one IoTFi board with RP2040, 4G LTE, WiFi, Bluetooth, and a 1.14-inch LCD display. Perfect for remote monitoring and connected projects.
All-in-one IoTFi RP2040 board with 2G GSM, WiFi/Bluetooth, GPS, LCD display & microSD slot for advanced prototyping and remote monitoring projects.
ReadPi RFID reader powered by Pico W. Features 125kHz scanning, 1.32 inch colour display, MicroSD slot & battery support.
Connect NVMe drives & AI accelerators to your Pi 5 with the M.2 HAT+ Board. Supports up to 500MB/s via PCIe 2.0. Active Cooler compatible.
Beagleboard BeagleBone AI-64 development board with TDA4VM SoC, 4GB LPDDR4 RAM and 16GB eMMC for AI, machine learning and edge computing.
UNO R4 WiFi development board with 32-bit Arm Cortex-M4 processing, Wi-Fi and Bluetooth, 256 KB flash and UNO-format footprint.
Cytron HAT-MAKER Maker pHAT for Raspberry Pi with three programmable buttons, LEDs, active buzzer and micro USB power and serial connection.
Versatile Raspberry Pi HAT with motor, servo & audio drivers. Features Neopixels, Python library & expandable design for creative projects.
Kitronik Air Quality Control HAT for Raspberry Pi. Features BME688 sensor, OLED display & multiple connections for data logging projects.
WIZNET development board with RP2040 & built-in WizFi360 WiFi. Pin-compatible with Raspberry Pi Pico for IoT and wireless projects.
Compact thumb-sized AI camera module by SEEED STUDIO. Features OV2640 sensor, supports face and people detection, and is compatible with Arduino.
Advanced Arduino-compatible dev board with Nordic nRF52840, BT 5.0, IMU & mic for TinyML projects.
Compact Arduino-compatible XIAO nRF52840 board with Bluetooth 5.0, NFC, low power. Ideal for wearables and IoT.
Seeed Studio Seeeduino Cortex-M0+ development board with ATSAMD21 MCU, 48 MHz CPU, 256 KB flash, Arduino Zero compatible and USB Type-C.
Seeed Studio Seeeduino Lotus development board with ATSAMD21 Cortex-M0+ 32-bit MCU at 48 MHz, 256 KB Flash, 32 KB SRAM and 12 Grove connectors.
Arduino UNO compatible Seeeduino Lotus board with integrated Grove connectors. Features an ATmega328P-MU MCU, ideal for prototyping.
Arduino-compatible LoRaWAN development board with Grove connectors and ultra-low power for rapid IoT prototyping and long-range wireless projects.
Compact ATmega328P board, fully Arduino Nano compatible. USB-C & Grove I2C connector for easy prototyping.
SEEED STUDIO CANBed development kit with ATmega32U4, MCP2515 & MCP2551. Combines Arduino & CAN-BUS shield on one board. Compatible with Arduino IDE.
Professional far-field USB microphone array with 5m range & 360° pickup. For smart home, conferencing & automation. Plug-and-play.
Compact Arduino development board with 9-axis IMU, ARM Cortex-M4F, and 1MB flash. Ideal for AI, IoT, and wearable tech projects.
Compact 0.91-inch MIDAS DISPLAYS OLED module. 128x32 yellow on black display with I2C interface, 3V logic. Perfect for Arduino & DIY projects.
MIDAS DISPLAYS 1.28in OLED graphic display module. 128x64 resolution, yellow on black, I2C interface, SH1106 IC, 3.3V logic.
Arduino Portenta CAT.M1/NB IoT GNSS shield with Cinterion TX62-W module for Cat.M1 and NB-IoT networks, eSIM and multi-constellation positioning.
Monitor temperature, humidity, air quality & eCO2 with Kitronik Board for Raspberry Pi Pico. Includes OLED display
FTDI FT230XQ USB 2.0 to UART converter IC in QFN-16. Full Speed bridge with 2048-byte EEPROM and 300 baud to 3 Mbaud rates.
Add long-range LoRa wireless (up to 5km) to your Raspberry Pi Pico. Features LCD display, antenna & 868MHz frequency for UK IoT projects.
SB Components WiFi HAT for Raspberry Pi Pico with 1.14-inch LCD, ESP8266 module, 2.4GHz WiFi and TCP/UDP support for IoT projects.
High-resolution DAC/ADC HAT for Raspberry Pi with balanced XLR output, 192kHz/24-bit Burr-Brown DAC, pre-assembled, no soldering.