Displaying 7801-7830 of 116085 products
Microchip
Advanced single-cell Li-Ion/Li-Polymer charge controller in SOT-23-5, 4.2V, 500mA, with thermal regulation and USB compliance.
Power Integrations
High-efficiency 725V flyback converter IC. Features EcoSmart tech, 132kHz operation & full protection suite for adapters & power supplies.
Infineon
Infineon BTS740S2 dual-channel smart high-side power switch. 43V, 50A, SOIC-20 package with AEC-Q100 qualification for automotive & industrial use.
Texas Instruments
Texas Instruments eFuse & Hot Swap Controller IC for 4.2-55V systems. Surface mount, 1-channel protection for safe hot swapping.
Texas Instruments TL494IN PWM controller for power supply design. 7-40V supply, 200mA output, 300kHz, in DIP-16 package.
Whadda
Whadda UK ProtoShield prototyping board for Arduino. Includes 170-hole breadboard, I/O pin connections & fits Uno, Mega & Leonardo boards.
Raspberry Pi
Official 48W Raspberry Pi Build HAT Power Supply. 8V 6A output with UK Type G plug. Features short-circuit, overcurrent & overvoltage protection.
MICROCHIP 3V, 250mA LDO regulator with 178mV dropout & 1.6µA current. Ideal for battery-powered consumer, automotive & security electronics.
Stable 3.3V LDO regulator for battery applications, 150mA output, low 25µA quiescent current.
Fixed 5V LDO regulator, 70mA, SOT-223, automotive-grade, 30V input, load dump protection.
St MicroElectronics
High-efficiency STMICROELECTRONICS buck regulator IC. 4-36V input, 1.235-35V adjustable output, 2A current. Surface mount HSOP-8 package.
MICROCHIP MCP1661T 500kHz DC-DC boost regulator. 2.4-5.5V input, 200mA output, up to 92% efficiency. SOT-23-5 package.
Onsemi
ONSEMI NCP1117LP 3.3V 1A fixed LDO regulator. Low 1.3V dropout, SOT-223 package, for consumer electronics.
MICROCHIP fixed LDO regulator: 3.3V, 500mA output, 210mV dropout, SOT-223-3 package. Stable power for your designs.
Buck, boost, inverting DC-DC regulator. Adjustable 1.25-40V, 1.5A output, 100kHz, SOIC-8. Ideal for portable, networking.
Stable 3.3V LDO, 200mA, 175mV dropout, 31µA quiescent current. Ideal for battery devices. TSOT-5, -40 to +125°C.
Texas Instruments low-power supervisor IC monitors 0.4-5V with 0.5% accuracy. Features 300ms delay, manual reset & open-drain output in SOT-23.
High-efficiency Texas Instruments adjustable DC-DC buck step down regulator, 3A output, TO-263-5 package. Ideal for power management.
TEXAS INSTRUMENTS LM1086 LDO regulator: fixed 3.3V, 1.5A output, 1.3V dropout. Ideal for power management & battery devices.
Texas Instruments 5V, 3A step-down switching regulator. Wide 4-60V input, high efficiency, needs only 4 external components. Ideal for power management.
Texas Instruments LM4040 precision micropower shunt voltage reference, 4.096V, TO-226AA package. Low noise, stable output.
Diodes Inc.
High-efficiency dual synchronous buck converter from DIODES INC. Features PWM/PSM modes, 2.5-5.5V input, 1A output, for portable electronics.
Pack of 2 analogue temperature sensor modules with NTC thermistor, -55°C to 125°C range. Ideal for monitoring projects.
Winstar
WINSTAR 16x2 LCD Display Module. STN Negative, White on Blue, 5V logic. Compact 80x36mm size. LED white backlight.
SB Components
Connect two HATs to your Raspberry Pi Pico simultaneously with the SB Components 2 Channel Expander Board. Ideal for testing and prototyping.
Bourns
BOURNS SMD TVS diode for ESD & surge protection. Bidirectional, 12V standoff, 26V clamp. For data ports, networks & portable electronics.
Infineon IRLML2803PBF SOT-23 MOSFET: 30V, 850mA, low Rds(on). Ideal for efficient power switching & DC-DC conversion.
MICROCHIP ATTINY85V 8-bit AVR MCU with 8KB flash, 10MHz speed & low-power modes. Ideal for embedded industrial & DIY projects.
MICROCHIP ATMEGA328-PU 8-bit AVR microcontroller. 20MHz, 32KB flash, 23 I/O. Features I2C, SPI, UART & touch support. DIP-28 package.
Precision MICROCHIP temperature-to-voltage converter IC. ±0.5°C accuracy, 10mV/°C slope, -40°C to 125°C range, AEC-Q100 grade.
