118278 products
Displaying 14161-14190 of 118278 products
DIODES INC. 3.3V 800mA LDO voltage regulator in SOT223 package. Features ±1% accuracy, thermal shutdown, and 70dB ripple rejection.
Stylish black aluminium case for the LattePanda 3 Delta. Features VESA mount, cooling vents, SMA punch-outs & GPIO access.
Broadcom dual-channel optocoupler with 5kV isolation, 50% CTR and 70V Vceo. Ideal for signal processing.
ISOCOM 4-channel optocoupler with 5.3kV isolation & 50% CTR for industrial, computing & measurement applications. DIP-16 package.
VISHAY TCLT1003 1-channel optocoupler, SOP, 5kV isolation, 60mA, ideal for power management and networking.
BROADCOM 5mm red through hole LED with integrated resistor. 12V, 626nm wavelength, 60° viewing angle. Ideal for industrial and LED lighting.
CML blue LED panel mount indicator with 8mm mounting hole, black chrome bezel and 24V DC operating voltage. IP67 rated.
Low-current 2mA Dialight LED indicator with green/red bi-colour display. Right-angle viewing, 3mm T-1 size, ideal for panel status lights.
MIDAS DISPLAYS 16x2 alphanumeric LCD module with black-on-white display, 5V parallel interface, and wide temperature range for electronic projects.
Arduino Science Kit R3 with Nano RP2040 Connect for education and hobby projects, including Science Carrier R3, embedded sensors and cables.
Compact ATmega32U4 board compatible with Arduino Leonardo. Features battery charging, rich I/O, and is ideal for DIY & wearable tech.
PIMORONI sensor breakout for heart rate, SpO2 & smoke detection. For Raspberry Pi & Arduino. Educational & hobbyist use. I2C, 3.3V/5V.
Reliable USB to RS485 converter by DFROBOT for industrial use. Compact design, easy installation, and stable data transmission.
RS485 temperature and humidity sensor by DFROBOT. Features a waterproof aluminium shell, -40 to 120°C range, and MODBUS RTU protocol.
Giant 3.5x scale PIMORONI Pico Jumbo board for Raspberry Pi Pico 2. Ideal for classroom demos & streaming. Fully assembled.
ISOCOM ISQ1X 4-channel optocoupler with 5.3kV isolation in a 16-pin DIP package. For industrial control & signal interfacing.
Isocom ISP844X 4-channel optocoupler in DIP-16 package with 5.3kV isolation voltage, 20% minimum CTR and AC input for signal isolation.
Isocom MOC8102X 1-channel transistor output optocoupler with 5.3kV isolation and 6-pin DIP package for through-hole PCB assembly.
Isocom H11G2 1-channel optocoupler with Darlington output, DIP-6 package, 5.3 kV isolation voltage and 1000% minimum CTR for signal isolation.
Add GPS to your Raspberry Pi with the Whadda NEO-6M receiver. 50-channel, ceramic antenna, plug-and-play GPIO. Ideal for tracking and logging.
BOURNS CDSOD323 Series TVS diode for ESD & surge protection. 3.3V, 10.9V clamp, SOD-323 case, for computers & consumer electronics.
Infineon IRLL2705 N-Channel Power MOSFET: 55V, 3.8A, 0.04Ω, SOT-223 surface mount. Low on-resistance, robust for efficient power switching.
ONSEMI N Channel Power MOSFET, 60V, 20A, 0.039 ohm in a TO-252 (DPAK) surface mount package. Ideal for LED backlighting and motor drivers.
Single chip Schottky Power Rectifier, 45V, 15A, TO-220FP. Ideal for high frequency DC to DC converters and industrial power management.
VISHAY SI4463CDY-T1-GE3 P-Channel MOSFET, 20V, 18.6A, SOIC. Ideal for adaptor switches, load switches & notebook apps.
High-speed 150V 8A ultrafast diode with 25ns recovery time for efficient power supplies & switching circuits. TO-220AC package.
Hifiberry Amp4 Class-D power amplifier board for Raspberry Pi, delivering up to 60W stereo output with 4-8 Ohm speaker compatibility.
Aluminium display stand for Raspberry Pi 5 & 7” Touch V2. 360° rotation, ventilation, start button. Durable build.
STMicroelectronics L298N dual full-bridge driver. High-voltage, high-current IC for DC and stepper motors. Up to 46V supply.
Antex 80W soldering iron for heavy-duty electrical & industrial work. Reaches 530°C, UK plug. Ideal for professional repairs.
