118278 products
Displaying 14581-14610 of 118278 products
Compact 0.96-inch 128x64 OLED display module from MIDAS DISPLAYS. Supports I2C, SPI & parallel interfaces. Ideal for embedded systems.
Compact DFRobot Turtle 2WD kit for Arduino. Aluminium chassis, differential drive, and servo socket ideal for robotics learning and competitions.
Compact 5V vibration motor module for Arduino. Add haptic feedback to alarms, robots & projects with easy PWM control.
Efficient aluminium heat sink kit for Raspberry Pi 3B/3B+. Includes 2 small and 1 large plate. Keep your Pi cool!
Arduino UNO compatible Seeeduino Lotus board with integrated Grove connectors. Features an ATmega328P-MU MCU, ideal for prototyping.
Raspberry Pi Debug Probe: USB-to-debug kit with SWD and UART. CMSIS-DAP compatible, works with OpenOCD. Includes all cables.
KEMET SBC Series 1.5µH unshielded ferrite power inductor. 4A saturation current, 0.03ohm DCR, up to +105°C.
KEMET SBC Series 1µH ferrite power inductor. Unshielded, NiZn drum core. 6.1A Irms, 6.4A Isat. Ideal for DC/DC converters & LED lighting.
KEMET SBC series 1.5mH ferrite power inductor for DC/DC converters & noise filters. 250mA rating, NiZn core, up to 105°C.
Kemet 220µH ferrite power inductor with NiZn drum core, 720mA RMS and 1A saturation current. Suited to DC/DC converters and power filtering.
KEMET SBC Series 220µH ferrite power inductor for DC/DC converters & noise filters. 1.1A RMS, 2.3A saturation, NiZn core.
KEMET SBC Series 220µH ferrite power inductor for DC/DC converters & filters. 1.3A RMS, 2.4A saturation current, up to 105°C.
KEMET 390µH ferrite power inductor for DC/DC converters & filters. 1.2A Irms, 1.9A Isat. For LED, TV, meter & power supply applications.
KEMET unshielded ferrite power inductor, 3300uH. Ideal for DC/DC converters, LED lighting, and noise filters. Operates up to +105°C.
Beagleboard BeagleBone AI-64 development board with TDA4VM SoC, 4GB LPDDR4 RAM and 16GB eMMC for AI, machine learning and edge computing.
SB Components USB to LoRa Adaptor with 868MHz band and up to 5km range. USB 2.0 interface, SMA high-gain antenna and CH340 UART converter.
SB COMPONENTS 8x8 LED matrix breakout with 64 WS2812B LEDs. Ideal for hobby & educational projects featuring brightness control & easy MCU connection.
Compact 0.96in RGB OLED display module by Waveshare. 64x128 resolution, 65K colours, SPI interface. Ideal for Raspberry Pi & Arduino.
Power your Raspberry Pi 5 via PoE with the Waveshare PoE HAT. Features active cooling, 5V 4.5A output, and a 12V header for external devices.
Add high-speed dual SSD storage to your Raspberry Pi 5 with the PIMORONI NVMe Base Duo. Supports M-key 2230-2280 drives.
Nexperia 74AHC1G04GW SOT-353 logic inverter. 2-5.5V operation, low power, high noise immunity & robust ESD protection.
Microchip ATtiny45 8-bit AVR microcontroller, 20MHz, DIP-8 package with 4KB ISP flash, 256 bytes EEPROM and SRAM for compact embedded control.
St MicroElectronics quad operational amplifier, 4 channels, 1.3 MHz gain bandwidth, 0.4 V/µs slew rate, SOIC-14 surface-mount package.
I²C-bus repeater with 2-channel buffer, 2.3-3.6V, TSSOP-8 package, supports clock stretching.
High-speed 280MHz D-type flip-flop from Nexperia. 1.65-5.5V operation, level translation, TSSOP-8 package. Ideal for digital logic design.
MICROCHIP 2 Kbit Serial EEPROM with Microwire interface in 6-pin SOT-23 package. Wide 2.5-5.5V range & -40°C to 125°C operation.
Texas Instruments 74LVC2G125 dual bus buffer gate in SSOP-8 with 3-state outputs, 1.65 V to 5.5 V supply range and 4.3 ns maximum tpd at 3.3 V.
General purpose 2-channel operational amplifier by STMicroelectronics. 3MHz bandwidth, 1.5V/µs slew rate, SOIC-8 surface mount. -40°C to 125°C.
Slim acrylic Pibow case for Raspberry Pi Zero 2 W. Clear top, GPIO access, tool-free assembly.
BROADCOM 1 Channel Optocoupler with transistor output, SOIC package, 50mA, 3kV isolation, CTR 50%. Ideal for signal isolation.
