118278 products
Displaying 15421-15450 of 118278 products
TI TLV70233DBVR fixed LDO regulator: 3.3V, 300mA, 260mV dropout, low quiescent current, ideal for battery devices.
Texas Instruments 2.5V precision shunt voltage reference IC. AEC-Q100, SOT-23, no output capacitor needed. For portable & automotive use.
Texas Instruments LM2672M-ADJ adjustable DC-DC buck regulator with 1A output, 6.5V to 40V input range and 8-pin SOIC surface-mount package.
Texas Instruments LM1117 adjustable voltage regulator, 800mA output, SOT-223 package. Output 1.25V to 13.8V with two external resistors.
Texas Instruments synchronous buck step-down regulator, fixed 3.3V output, 1A, 3V-17V input, WSON-8 package. Ideal for portable devices.
Precision LM4041 series voltage reference IC in SOT-23 package. Adjustable from 1.233V to 10V, low noise, no capacitor required.
High-efficiency synchronous buck regulator, 3.8-40V in, adjustable out, 5A, EMI-reducing FSS, HSOIC-8.
Arduino-compatible SparkFun RedBoard Plus with ATmega328P, 16MHz clock, 32kB flash, USB-C and Qwiic connectivity for makers and prototyping.
Winstar 16x2 character OLED display module with blue-on-black SPI interface, 5V logic voltage and 80 mm x 36 mm module size.
Expand your Raspberry Pi Pico: connect up to four HATs or add-ons with this SB Components expander board. Ideal for prototyping.
BOURNS CDSOD323 TVS diode array for ESD & surge protection. 3.3V, 19V clamp, low 3pF capacitance. Ideal for consumer electronics & data lines.
LITTELFUSE SMAJ 5V unidirectional TVS diode for ESD & surge protection. 400W peak power, surface mount DO-214AC package. Ideal for I/O & VCC lines.
Microchip 16-bit SPI I/O expander, 1.8V to 5.5V, 25mA per pin, SSOP-28 package. Adds parallel I/O to microcontroller projects.
USB 2.0 hub controller IC from Microchip with 2, 3 or 4 downstream ports, MultiTRAK technology and 36-pin QFN package measuring 6 x 6 mm.
Surface-mount Schottky rectifier diode, 40V, 1A. Low 750mV forward voltage for high efficiency in inverters & protection circuits.
Nexperia 74LVC1G04 single inverter logic IC in 5-pin TSSOP. Features 5 V tolerant inputs, CMOS technology and IOFF partial power-down protection.
High-speed CMOS inverter with Schmitt trigger input, SOT-23 package. Low power, 2-6V supply, ideal for industrial use.
STMicroelectronics low voltage RS422/RS485 transceiver in SOIC-8 package. 15Mbps data rate, 3V-3.6V supply, ±15kV ESD protection.
Texas Instruments CD4541BE CMOS programmable timer, 14-pin DIP. Features a 16-stage counter, 3 V to 18 V supply range and selectable outputs.
Texas Instruments Hex Schmitt Trigger Inverter, 14-pin SOIC. Ideal for AC inverter drives, servo drives and printers. 2V-6V supply.
TEXAS INSTRUMENTS LM3480 fixed LDO regulator, 12V, 100mA, SOT-23. Low dropout, surface mount. Ideal for power management.
Würth Elektronik 5V TVS diode array for ESD protection on USB, Ethernet & fast data lines. SOT-23, 6-pin, surface mount.
High-quality Multicomp PRO LED Light Bar Graph Array with 20mA forward current and 30mcd luminous intensity. Ideal for signal and level indication.
Servo 2040: RP2040-based controller for 18 servos, USB-C, monitoring, LEDs, ideal for robotics.
40-way male to male jumper wire, 300mm, pre-cut and pre-stripped. Copper conductors, PVC insulation, for breadboard prototyping.
Multicomp Pro transparent light pipe for PCB mounting. 4.1mm hole, 6.4mm length, 94V-0 PC material. Ideal for panels & enclosures.
Snap-in rectangular neon indicator (250V AC, 20mA, green). Black body with 6.3mm tabs for panel signalling and status indication.
Bulgin 0568 Series snap-in neon indicator with integral resistor for 220-240VAC. Features fast-on terminals, 8mm hole & UL/CSA/VDE approvals.
Reliable 230V AC panel mount LED indicator from BULGIN. Direct neon replacement with flying leads. Flicker-free and vibration resistant.
Bright 5mm cool white LED, diffused, 4000mcd, 3.4V, 18mA. Through-hole mount. Pack of 10 for great value.
