118278 products
Displaying 16111-16140 of 118278 products
KEMET SBC Series ferrite power inductor, 10µH, unshielded. Ideal for DC/DC converters, LED lighting and noise filters.
KEMET 680µH unshielded ferrite power inductor with NiZn drum core. Ideal for DC/DC converters, LED lighting, and noise filters.
KEMET 4.7µH unshielded ferrite power inductor for DC/DC converters & noise filters. 2.6A Irms, 3.1A Isat, 0.04 ohm DCR.
KEMET SBC series ferrite power inductor, 100µH, 1A, unshielded, NiZn core up to +105°C. Ideal for DC/DC converters and LED lighting.
KEMET 6.8µH ferrite power inductor for DC/DC converters & noise filters. Unshielded, rated 4.5A Irms, up to +105°C operation.
KEMET SBC series 6.8mH ferrite power inductor for DC/DC converters & noise filters. Unshielded drum core, rated to +105°C.
KEMET SBC series 6.8mH ferrite power inductor for DC/DC converters & noise filters. 210mA Irms, 440mA Isat, up to +105°C.
KEMET SBC series 10mH unshielded ferrite power inductor, 120mA. Ideal for DC/DC converters and noise filters.
KEMET 6.8µH ferrite power inductor for DC/DC converters & noise filters. 4.9A Irms, 12.1A Isat, operates up to +105°C.
High-quality FPC camera cable for Raspberry Pi 5, 300mm length. Secure connection, reliable data transmission. Ideal for camera modules.
MakerPad Pro SmartScreen by SB Components: ESP32 board with 3.5-inch touch display, OV2640 2MP camera, WiFi, Bluetooth and GPIO breakouts.
Vivid 1.14-inch IPS LCD breakout board with 240x135 resolution. 3.3V/5V & SPI interface for Arduino, Raspberry Pi & Pico projects.
Sleek aluminium case for Raspberry Pi 5 with thermal pad. Easy GPIO access, robust build. Ideal for media centres.
Cyntech CoolingPro CNC open case for Raspberry Pi 5. Precision-cut, passive cooling design with thermal pads and easy GPIO access.
High-speed, low-power ONSEMI 74HC00 NAND gate IC. 8ns delay, 2-6V operation, drives 10 LS-TTL loads. Ideal for digital logic.
NEXPERIA 74HC30D 8-input NAND gate logic IC in 14-pin SOIC. Wide 2-6V supply, industrial ESD protection, for robust digital designs.
Renesas dual channel MOSFET driver IC, 4.5V-16V supply, 2A output, 20ns delay. Ideal for SMPS & motor control. SOIC-8 surface mount.
Microchip 8-bit MCU with 7KB Flash, 256 Bytes RAM, EUSART, I2C, SPI and 4-channel 10-bit ADC in a DIP through-hole package.
Nexperia 74LVC1G14GV single Schmitt-trigger inverter IC, 5-pin SC-74A, 1.65V to 5.5V, for industrial use.
FTDI USB 2.0 Hi-Speed to UART interface bridge with dual MPSSE for JTAG, SPI & I²C. VQFN 56-pin, 1.62V to 1.98V.
Texas Instruments 3.3V fixed LDO voltage regulator, 150mA output, 2.2V to 16V input range, 280mV dropout and SOT-23-5 surface-mount package.
Texas Instruments SN65176BDR RS422/RS485 bus transceiver in 8-pin SOIC, 5V supply, -40°C to 105°C, for multipoint bus communication.
NXP P82B96 bus buffer IC in an SOIC-8 package. Non-latching bidirectional I²C interface with 400pF and 4000pF bus capacitance sides.
STMicroelectronics TIP125 PNP Darlington transistor rated 60V, 65W and 5A in TO-220 case. For driver stages, motor control and audio amplifiers.
Broadcom HCPL-2212 1-channel optocoupler, 5Mbaud, 8-pin DIP with totem pole output and integrated Schmitt trigger for signal isolation.
RENESAS 1 channel SMD optocoupler with 2.5kV isolation & 50mA current. Ideal for signal isolation in control systems & power supplies.
Bivar transparent circular press-fit light pipe with UL94V-0 rating. Ideal for panel mounting and industrial applications.
High brightness Broadcom red 5mm through hole LED. AlInGaP technology, 20mA, 630nm. Ideal for outdoor, automotive & signalling applications.
Buy the CREE 5mm blue diffused LED. High output, 30° viewing angle, ideal for lighting, industrial & portable devices.
Kingbright DC-10GWA 10-segment green LED bar graph array with white segments, 12 mcd intensity and through-hole mounting. End-stackable.
