Tenma Stackable 4mm Banana Plug Lead Shrouded 0.5m Green

The Tenma Stackable 4mm Banana Plug Lead is a shrouded test lead with 4mm banana plugs at both ends, designed for connecting electrical test equipment with dependable contact.

Overview

This lead connects two 4mm banana jacks, sockets or binding posts through its male plugs. The shrouded design covers the conductive parts of the plugs, and each plug has an insulating grey tip to help prevent accidental contact with live terminals. Its stackable design allows multiple leads to be connected in series via the rear 4mm female connections, which suits custom test setups or extending reach.

Key Features

• Stackable design with rear 4mm female connections
• Shrouded plugs with insulating grey tips
• Lantern contact springs designed for low resistance and high reliability
• Nickel-plated brass conductor
• Flexible silicone wire jacket with resistance to heat, cold and physical wear
• Retractable clear sleeves for standard single-port sockets and safety double-port sockets
• Total length of 0.5 m (50 cm)

Ratings and Compliance

The lead is rated for use up to 600V CAT II with reinforced insulation. It carries a standard current rating of 12 A and can handle currents up to 36 A at +40°C, depending on wire gauge. It has an operating temperature range from -20°C to +80°C and complies with the European Low Voltage Directive, meeting the harmonised safety standard EN/IEC 61010-031:2008.

Dimensions and Weight

Product dimensions (width x depth x height) are listed as 3.3 x 1.5 x 4.3, and the lead weighs 20 g.

Applications

Suitable for engineers, technicians and electronics hobbyists, the lead supports bench-top testing and measurement applications where extended reach or custom test setups are required.

Choose the Tenma Stackable 4mm Banana Plug Lead in green when you need a shrouded 4mm test lead for connecting banana jacks, sockets or binding posts in bench-top test and measurement work.