Showing 5581-5610 of 118996 products
Onsemi
ONSEMI LDO regulator, 3.3V fixed output, 300mA, 275mV dropout, TSOT-23 package.
Texas Instruments
High-speed CMOS Hex Schmitt-triggered Inverter IC by Texas Instruments. DIP, 14 pins, low power. Ideal for aerospace & defence.
Diodes Inc.
DIODES INC. 3.3V 800mA LDO voltage regulator in SOT223 package. Features ±1% accuracy, thermal shutdown, and 70dB ripple rejection.
Kksb
Stylish black aluminium case for the LattePanda 3 Delta. Features VESA mount, cooling vents, SMA punch-outs & GPIO access.
Broadcom
Broadcom dual-channel optocoupler with 5kV isolation, 50% CTR and 70V Vceo. Ideal for signal processing.
Isocom
ISOCOM 4-channel optocoupler with 5.3kV isolation & 50% CTR for industrial, computing & measurement applications. DIP-16 package.
VISHAY
VISHAY TCLT1003 1-channel optocoupler, SOP, 5kV isolation, 60mA, ideal for power management and networking.
BROADCOM 5mm red through hole LED with integrated resistor. 12V, 626nm wavelength, 60° viewing angle. Ideal for industrial and LED lighting.
CML
Blue LED panel mount indicator with black chrome bezel, 8mm hole, 24V DC, IP67, long life, low power, for industrial signalling.
Dialight
Low-current 2mA Dialight LED indicator with green/red bi-colour display. Right-angle viewing, 3mm T-1 size, ideal for panel status lights.
Midas Displays
MIDAS DISPLAYS 16x2 alphanumeric LCD module with black-on-white display, 5V parallel interface, and wide temperature range for electronic projects.
Arduino
Arduino Science Kit R3: Build physics & ML projects with Nano RP2040. Real-time data, sensors, and teaching support.
DFRobot
Compact ATmega32U4 board compatible with Arduino Leonardo. Features battery charging, rich I/O, and is ideal for DIY & wearable tech.
Pimoroni
PIMORONI sensor breakout for heart rate, SpO2 & smoke detection. For Raspberry Pi & Arduino. Educational & hobbyist use. I2C, 3.3V/5V.
Reliable USB to RS485 converter by DFROBOT for industrial use. Compact design, easy installation, and stable data transmission.
RS485 temperature and humidity sensor by DFROBOT. Features a waterproof aluminium shell, -40 to 120°C range, and MODBUS RTU protocol.
Giant 3.5x scale PIMORONI Pico Jumbo board for Raspberry Pi Pico 2. Ideal for classroom demos & streaming. Fully assembled.
ISOCOM ISQ1X 4-channel optocoupler with 5.3kV isolation in a 16-pin DIP package. For industrial control & signal interfacing.
ISOCOM ISP844X 4-channel optocoupler with 5.3kV isolation, AC input & 20% CTR. For industrial control, signal transmission & networking.
ISOCOM 6-pin DIP optocoupler with 5.3kV isolation. Ideal for industrial control, motor drives & noise-immune signal transmission.
ISOCOM H11G2 1-channel optocoupler with Darlington output. 5.3kV isolation, 1000% CTR, for comms & signal processing. DIP-6 package.
Whadda
Add GPS to your Raspberry Pi with the Whadda NEO-6M receiver. 50-channel, ceramic antenna, plug-and-play GPIO. Ideal for tracking and logging.
Bourns
BOURNS CDSOD323 Series TVS diode for ESD & surge protection. 3.3V, 10.9V clamp, SOD-323 case, for computers & consumer electronics.
Infineon
High-efficiency Infineon N-Channel CoolMOS™ MOSFET, 650V, 20.7A, 0.19Ω. For power supplies, computing & electronics.
ON Semiconductor PZTA42T1G NPN transistor, 300V, 500mA, SOT-223. AEC-Q101 qualified for industrial & automotive use.
St MicroElectronics
STMICROELECTRONICS TIP31C NPN transistor for audio, power & switching. 100V, 3A, 40W in a TO-220 through-hole package.
VISHAY 100V P-Channel MOSFET in PowerPAK 1212 package. Low 0.134ohm Rds(on), 13.2A current. Ideal for DC/DC power supplies.
Wurth Elektronik
Würth Elektronik 5V TVS diode array for ESD & surge protection. 7.7V clamp, SOT-563 package, ideal for comms & networking.
Hifiberry
High-efficiency Class-D amp with dual clocks, up to 60W, for Raspberry Pi. Supports 44.1-192kHz, 12-24V power.
Monkmakes
Control 4 low-voltage devices with this Monk Makes relay board for Raspberry Pi Pico. Features OLED display, buttons & buzzer. 108x63mm.
