Showing 7021-7050 of 118996 products
Ixys Semiconductor
IXYS MCC162-16IO1 thyristor module, 181A, 1.6kV, panel mount, for motor and lighting control.
Ween
WEEN SEMICONDUCTORS 500V, 200µA thyristor for low-power control. Ideal for switching, protection & interfacing with microcontrollers.
Very sensitive gate BT134W triac, 600V, 1A, in SOT-223 package. Logic-level compatible for motor control and AC switching.
St MicroElectronics
STMICROELECTRONICS TO-220AB triac for 16A AC switching. Features 600V rating, snubberless sensitivity, and high commutation for industrial control.
Microchip
Microchip MCP601-I/P CMOS op amp: low power, 2.8MHz, rail-to-rail output. Ideal for portable and battery circuits.
Texas Instruments
Texas Instruments dual general-purpose op-amp in DIP-8. Features 1MHz bandwidth, ±5V to ±15V supply, and low power. Ideal for sensing.
High-performance CMOS op amp, 50MHz bandwidth, rail-to-rail I/O, low offset. Ideal for ADC driving and portable electronics.
Onsemi
ON Semiconductor MC74HC04ADG Hex Inverter IC, SOIC-14, 2-6V, CMOS compatible for industrial logic inversion.
Broadcom
BROADCOM ACPL-C87A voltage sensor with 5kV isolation & 15kV/µs noise immunity. Ideal for motor drives & power converters.
Broadcom HCPL-3700 optocoupler for AC/DC threshold detection. Darlington output, 3.75kV isolation & programmable sense voltage. Ideal for voltage monitoring.
ONSEMI MCT6 dual-channel phototransistor optocoupler. Features 8-pin DIP, 5kV isolation, and 60mA forward current for sensing and power management.
VISHAY
VISHAY CNY17F-3 1-channel optocoupler. 6-pin DIP, 60mA forward current, 5kV isolation & 100% CTR for secure signal transfer.
VISHAY 4N25 optocoupler with 5kV isolation. 1 channel, DIP-6 package, 60mA forward current. For power management & motor control.
VISHAY 4-channel phototransistor optocoupler in SSOP package. Features 3.75kV isolation, 60mA forward current, and 50% CTR. Ideal for industrial & comms
ON Semi FOD817DSD optocoupler: 1 channel, 5kV isolation, 300-600% CTR. Surface mount, Pb-free. Ideal for sensing & power management.
High-speed digital optocoupler, 2 channels, 3.75kV isolation, SOIC-8. Ideal for noise-heavy environments.
BROADCOM 1-channel digital optocoupler with 3.75kV isolation, 5Mbaud speed & wide 4.5-20V range. Ideal for industrial signal isolation.
VISHAY MB6S surface mount bridge rectifier, 600V, 500mA. Fast recovery, high surge current, ideal for compact PCB mains rectification.
Multicomp Pro
High-power 1.6kV, 35A three-phase bridge rectifier module from Multicomp Pro. Ideal for industrial motor drives and power supplies.
ON Semi Schottky Rectifier: 10V, 2A, DO-214AC, ultra-low VF. Ideal for power supplies and converters. AEC-Q101 qualified.
Nexperia
High-efficiency Schottky rectifier, 60V, 4.5A, SOD-128. Ideal for power management, automotive, and industrial use.
Taiwan Semiconductor
AEC-Q101 qualified ES1JL fast diode. 600V, 1A, 35ns recovery. For automotive, industrial & consumer electronics.
SB Components
Control high-power devices safely with this dual-channel, optoisolated relay HAT for the Raspberry Pi Pico. Supports 7A/250V AC loads.
MICROCHIP MCP1415T high-speed 1.5A MOSFET driver IC. 4.5-18V supply, 48ns delay, AEC-Q100 for motor control & power management.
STMICROELECTRONICS 4-channel push-pull motor driver IC. TTL logic, 4.5-36V input, 600mA output per channel. SOIC-20 package.
Infineon
Infineon dual high/low-side gate driver IC for MOSFETs/IGBTs. 2.5A output, 10-20V supply, UVLO, SOIC-16 package. For motor drives & SMPS.
Ultra-low capacitance double rail-to-rail ESD protection diode by Nexperia. 7.5V clamping, 12kV protection. Ideal for high-speed data lines.
Protect USB low and full-speed ports with this 60W, 6V TSSOP transient suppressor. Ideal for computers and networking.
Raspberry Pi
Official Raspberry Pi PoE+ HAT add-on board. Power your Pi 3 B+, Pi 4, or CM4 via Ethernet. 802.3af compliant, 5V/4A output with fan control.
