121221 products
Showing 14431-14460 of 121221 products
KEMET SBC Series 2200µH ferrite power inductor. NiZn core, unshielded, ideal for DC/DC converters.
KEMET SBC series 470µH ferrite power inductor for DC/DC converters & noise filters. Rated 1.1A Irms, 1.6A Isat, up to +105°C.
KEMET 47µH ferrite power inductor with NiZn drum core. Unshielded, 2A Irms, 4.3A Isat. Ideal for DC/DC converters and LED lighting.
Silent aluminium heatsink case for Raspberry Pi Zero. Provides passive cooling, full port access, and includes thermal pads & tools.
ReadPi RFID reader powered by Pico W. Features 125kHz scanning, 1.32 inch colour display, MicroSD slot & battery support.
NetPi Ethernet HAT for Raspberry Pi Pico: Fast Ethernet, LCD display, joystick, four sockets. Ideal for IoT and automation.
Argon 40 NEO 5 case for Raspberry Pi 5 in aluminium alloy with black and red detailing, built-in 30 mm PWM fan and screw-on top cover.
Argon 40 NEO 5 M.2 NVMe case for Raspberry Pi 5 in black aluminium alloy. Supports M.2 NVMe drives up to 2280 with a 30 mm PWM cooling fan.
IP65 rated 12V LED panel indicator light from AB COMPONENTS. 22mm panel cut-out, green illumination, for industrial control & machinery.
Compact NEXPERIA 74HC1G00GW 2-input NAND gate IC in SOT-353 package. Features low power, high noise immunity & robust ESD protection.
MICROCHIP dual 12-bit DAC with internal VREF, SPI interface, and 2.7V-5.5V supply. Ideal for automotive & portable electronics.
80MHz PIC32 microcontroller with 512KB flash, 128KB RAM, Ethernet MAC, USB, CAN in TQFP-100. Ideal for embedded connectivity.
St MicroElectronics LIS3DHTR 3-axis MEMS digital accelerometer in LGA-16 package. ±2g to ±16g range, I2C/SPI interface, 1.71V to 3.6V supply.
Low-power ST3232CDR RS232 transceiver IC for 3-5.5V systems. 2 drivers, 2 receivers, 400kbps data rate. Ideal for portable devices.
Low-power I2C RTC IC from NXP, 0.9V–5.5V, alarm, timer, SOIC-8. Ideal for cameras, printers, mobile devices.
Texas Instruments SN74LVC2G34 dual buffer gate IC in SOT-23-6. Operates 1.65 V to 5.5 V VCC with IOFF partial-power-down support.
AP2210 300mA ULDO regulator with ultra-low dropout, 1µA standby, and 75dB PSRR ideal for RF & battery devices.
Durable black anodised aluminium Raspberry Pi 5 case by KKSB. Spacious frame, compatible with HATs & Active Cooler. Includes stackable header.
BROADCOM 4 channel optocoupler with transistor output. SOIC, 16 pins, 50mA, 3kV isolation. Ideal for programmable controllers.
BROADCOM 8-pin SMD optocoupler for IGBT/MOSFET gate drive. Features 3.75kV isolation, 15kV/µs CMTI for motor control & industrial inverters.
1-channel phototransistor optocoupler, DIP-6, 60mA, 5.3kV isolation, 63% CTR, ideal for telecom.
Bright 14.22mm red 7-segment LED display by Avago. Common anode, 2.1V, 20mA. Ideal for industrial, consumer & portable electronics.
CML green LED panel mount indicator with satin chrome bezel. 2.2 VDC, 8mm mounting, IP67 rated. Ideal for industrial signalling.
Dialight green 3mm T-1 through-hole circuit board indicator LED with 2 mA forward current, 1.6 mcd intensity and UL94V-0 black housing.
Lumex QuasarBrite red LED panel mount indicator, 4mm, 30mcd, 635nm peak wavelength, 60° viewing angle, with pre-fitted 158mm leads.
Arduino Nano 33 BLE Rev2 with nRF52840, Bluetooth LE, IMU, and MicroPython support. Compact, powerful, and perfect for wearables.
DFROBOT FireBeetle 2 ESP32-E IoT Microcontroller with Wi-Fi & Bluetooth, dual-core processor, and onboard charging. Ideal for IoT & smart home projects.
Compact Pimoroni SCD41 CO2 sensor breakout. Measures CO2, temperature & humidity. I2C, 3-5V, Raspberry Pi & Pico compatible.
Compact DFROBOT 6V electric push rod delivering 128N force. Ideal for robotics, automation, and DIY electronics requiring precise linear motion.
High accuracy, low power SHT40 sensor breakout for IoT, DIY & environmental monitoring. I2C, fast response, ideal for batteries.
