121221 products
Showing 14851-14880 of 121221 products
STMicroelectronics TDA7388 4-channel car audio amplifier. 45W per channel, AB class, low noise, with standby/mute functions for car radios.
Texas Instruments INA188 instrumentation amplifier in SOIC-8 package, with 25µV input offset voltage and 12nV/√Hz noise density.
Texas Instruments high-side current sense amplifier in SOIC 8-pin package. Features I2C interface, 26V common mode, and -40°C to 125°C range.
High-speed JFET input dual operational amplifier by STMicroelectronics. 4MHz, 16V/µs slew rate, SOIC 8-pin. Ideal for general-purpose use.
High-side power load switch with adjustable current limit, 0.8A, 1.8V-5.5V input, thermal protection, SOT-23-5.
Power Integrations LinkSwitch-TN off-line switcher IC. 360mA output, 85-265VAC input, DIP-8. Ideal for LED lighting & industrial applications.
AEC-Q100 qualified Infineon high-side power switch (1.1A, 48V) with full protection suite for automotive & industrial use.
Infineon BTS721L1 quad high side power switch in SOIC-20 package. 5 to 34 V input range, 85 mΩ on-state resistance and AEC-Q100 qualified.
Single channel high-side power load switch, 500mA, 5V, SOT-23-5. Features thermal & short-circuit protection. By STMicroelectronics.
Ultra-low leakage high-side load switch for 5.5V, 200mA applications. Active-high enable, SOT-23-6 package.
Microchip TC7660CPA DC-DC charge pump converter in an 8-pin DIP package, 20mA rating. Converts 1.5 V to 10 V input to negative output.
Professional 250V neon indicator lamp for panels. 13mm mount, quick-connect terminals. For boilers, appliances & industrial equipment.
Precision adjustable shunt regulator (2.5-20V) with 1% accuracy & ±55ppm/°C stability. Ideal SMT replacement for zener diodes.
Microchip 3.3V low quiescent current LDO voltage regulator in 3-pin SOT-89 package, with 250mA output and 2.3V to 6.0V input range.
Microchip 3.3V 250mA LDO regulator in SOT-89-3 package. 2.7V to 13.2V input and 2µA typical quiescent current for battery-powered designs.
Diodes AP1509-33SG-13 buck converter IC with 3.3V fixed output, 2A load capability, 4.5V to 22V input and SOIC-8 surface-mount package.
Renesas 300nA nano power voltage reference with a fixed 1.5V output in a SOT-23 package. Suitable for portable devices & power management.
Microchip adjustable LDO voltage regulator featuring 26V max input, 3A output, and fast transient response. Ideal for automotive & portable devices.
ONSEMI LDO voltage regulator: 1.8V fixed output, 250mA, 180mV dropout. Wide 1.9-5.5V input, SMD XDFN-4 package. For stable power in electronics.
ON Semiconductor fixed 3.3V LDO regulator. 300mA output, 235mV dropout, 1.7-5.5V input. TSOP-5 SMD package for stable power.
High-efficiency Texas Instruments DC-DC boost step-up regulator. 2.9-18V input, adjustable up to 38V output, 3A current, 2.2MHz. Surface mount HTSSOP-14.
Texas Instruments UA78M33QDCYRG4Q1 fixed 3.3V linear voltage regulator, 500mA output, 5.3V to 25V input, SOT-223-4 surface-mount package.
Texas Instruments LM4040 series precision micropower shunt voltage reference. AEC-Q100 qualified, no external capacitor required. SOT-23-3 package.
Adjustable synchronous buck regulator by Texas Instruments. 4.5V-28V input, 0.6V-26V output, 2A. Ideal for industrial & consumer electronics.
Low dropout voltage regulator, 12V fixed output, 1A current, SOT-223-3. Ideal for industrial & automotive use.
Precision TL431 shunt voltage reference, adjustable 2.495V-36V, 1% accuracy, SOT-23 surface mount. Ideal for power supplies and monitoring.
Precision TEXAS INSTRUMENTS fixed voltage reference IC in SOT-23 package. Low power, high accuracy for portable & industrial applications.
Onsemi under-voltage reset circuit in TO-92 through-hole package, 4.59V threshold, 1V minimum operating voltage and open-collector output.
Official Raspberry Pi 1m Micro USB cable in red. Perfect for powering your Pi Zero 2 W or other models from a PC or USB supply.
Compact 16x2 blue OLED display module with SPI interface. Perfect for Arduino, Raspberry Pi, and electronic prototyping projects.
