121221 products
Showing 15211-15240 of 121221 products
0.96-inch OLED module with 128x64 resolution, yellow on black, I2C/SPI, SSD1306. Compact and reliable for embedded projects.
Compact 0.96-inch 128x64 OLED display module from MIDAS DISPLAYS. Supports I2C, SPI & parallel interfaces. Ideal for embedded systems.
DFRobot 7-24V to 5V/4A DC-DC buck converter module with 20W maximum power and six on-board output ports for powering electronic projects.
Detect H2, NO & NO2 with the DFRobot Fermion MiCS-2714 breakout board. Features analogue output, low-power mode & integrated calculations for Arduino.
4-piece black aluminium heat sink kit by SEEED STUDIO. Designed to cool the Raspberry Pi 4B chip efficiently and prevent overheating.
Seeed Studio Seeeduino Lotus development board with ATSAMD21 Cortex-M0+ 32-bit MCU at 48 MHz, 256 KB Flash, 32 KB SRAM and 12 Grove connectors.
Capture rapid motion without artefacts using the 1.6MP Raspberry Pi Global Shutter Camera. Ideal for machine vision and high-speed photography.
KEMET SBC Series 220µH ferrite power inductor for DC/DC converters & noise filters. 390mA Irms, 320mA Isat, up to 105°C.
KEMET SBC Series ferrite power inductor, 1.5µH, 4A for DC/DC converters and noise filtering. High efficiency, unshielded. RoHS compliant.
KEMET SBC Series 1.2µH ferrite power inductor for DC/DC converters & noise filters. 7.5A RMS, unshielded, for LED, TV & power supplies.
KEMET SBC Series ferrite power inductor, 2.7µH. Ideal for DC/DC converters, LED lighting, and power supplies. Operates up to +105°C.
KEMET SBC Series 220µH ferrite power inductor for DC/DC converters & noise filters. 1.1A RMS, 2.3A saturation, NiZn core.
KEMET SBC Series 220µH ferrite power inductor for DC/DC converters & filters. 1.3A RMS, 2.4A saturation current, up to 105°C.
KEMET 390µH ferrite power inductor for DC/DC converters & filters. 1.2A Irms, 1.9A Isat. For LED, TV, meter & power supply applications.
KEMET unshielded ferrite power inductor, 3300uH. Ideal for DC/DC converters, LED lighting, and noise filters. Operates up to +105°C.
Beagleboard BeagleBone AI-64 development board with TDA4VM SoC, 4GB LPDDR4 RAM and 16GB eMMC for AI, machine learning and edge computing.
SB Components USB to LoRa Adaptor with 868MHz band and up to 5km range. USB 2.0 interface, SMA high-gain antenna and CH340 UART converter.
SB COMPONENTS 8x8 LED matrix breakout with 64 WS2812B LEDs. Ideal for hobby & educational projects featuring brightness control & easy MCU connection.
Compact 0.96in RGB OLED display module by Waveshare. 64x128 resolution, 65K colours, SPI interface. Ideal for Raspberry Pi & Arduino.
Power your Raspberry Pi 5 via PoE with the Waveshare PoE HAT. Features active cooling, 5V 4.5A output, and a 12V header for external devices.
Add high-speed dual SSD storage to your Raspberry Pi 5 with the PIMORONI NVMe Base Duo. Supports M-key 2230-2280 drives.
Nexperia 74AHC1G04GW SOT-353 logic inverter. 2-5.5V operation, low power, high noise immunity & robust ESD protection.
Microchip ATtiny45 8-bit AVR microcontroller, 20MHz, DIP-8 package with 4KB ISP flash, 256 bytes EEPROM and SRAM for compact embedded control.
St MicroElectronics quad operational amplifier, 4 channels, 1.3 MHz gain bandwidth, 0.4 V/µs slew rate, SOIC-14 surface-mount package.
I²C-bus repeater with 2-channel buffer, 2.3-3.6V, TSSOP-8 package, supports clock stretching.
High-speed 280MHz D-type flip-flop from Nexperia. 1.65-5.5V operation, level translation, TSSOP-8 package. Ideal for digital logic design.
MICROCHIP 2 Kbit Serial EEPROM with Microwire interface in 6-pin SOT-23 package. Wide 2.5-5.5V range & -40°C to 125°C operation.
Texas Instruments 74LVC2G125 dual bus buffer gate in SSOP-8 with 3-state outputs, 1.65 V to 5.5 V supply range and 4.3 ns maximum tpd at 3.3 V.
General purpose 2-channel operational amplifier by STMicroelectronics. 3MHz bandwidth, 1.5V/µs slew rate, SOIC-8 surface mount. -40°C to 125°C.
Slim acrylic Pibow case for Raspberry Pi Zero 2 W. Clear top, GPIO access, tool-free assembly.
