121221 products
Showing 17101-17130 of 121221 products
KEMET SBC Series 10µH ferrite power inductor for DC/DC converters & noise filters. 3.6A Irms, 3A Isat, up to +105°C operation.
KEMET unshielded ferrite power inductor, 1µH, 7.4A Irms. For DC/DC converters, noise filters, LED drivers & power supplies.
KEMET 15µH unshielded ferrite power inductor for DC/DC converters & noise filters. 9.1A saturation, 3.8A RMS current.
KEMET SBC Series 15µH power inductor, 4.8A RMS, 9.6A saturation, NiZn core. Ideal for DC/DC converters.
KEMET 15µH unshielded power inductor for DC/DC converters & noise filters. Ideal for power supplies, LED lighting & smart meters.
KEMET unshielded ferrite power inductor, 1500uH (1.5mH). For DC/DC converters, noise filters, LED lighting & power supplies.
UNO R4 WiFi development board with 32-bit Arm Cortex-M4 processing, Wi-Fi and Bluetooth, 256 KB flash and UNO-format footprint.
Connect displays easily with the official Raspberry Pi 5 FPC Display Cable. Fits the four-lane MIPI connectors for reliable data transfer.
Ultra-compact RP2040 board with dual-core CPU, 2MB flash, USB-C, and 22 GPIOs. Ideal for embedded projects.
Protect your Raspberry Pi 5 with the PIMORONI Pibow Coupe 5 Case in Ninja Black. Slim, hackable, and compatible with HATs and the official cooler.
Multicomp Pro insulated transistor kit for TO-3 packages. Mica body, 1kV breakdown voltage. Pack of 10.
30mm blower fan for Raspberry Pi 5 by The Pi Hut. Side-exhaust design, direct replacement for the official active cooler, 5V and 0.2A.
ONSEMI MM74HC132 quad 2-input NAND Schmitt trigger IC. Low power, high noise immunity, drives 10 TTL loads. 14-pin SOIC package.
NEXPERIA 8-channel analogue multiplexer/demultiplexer, 4.5V to 15.5V, SOIC 16-pin. Ideal for signal processing and surface mount applications.
Low-power MCP9700T-E/TT analogue temperature sensor IC in SOT-23 package. ±4°C accuracy, wide voltage range, fits many designs.
Infineon 256Kbit I2C FRAM NVRAM in 8-pin SOIC. High endurance, no write delays, 2.7V-5.5V. Ideal for embedded design.
Infineon high-speed CAN transceiver, 1 Mbaud, SOIC-8 package. AEC-Q100 qualified for automotive & industrial applications.
64Kbit I2C F-RAM memory, 8K x 8, 1MHz, 2.7-3.65V, SOIC 8. High endurance, 121-year retention.
TEXAS INSTRUMENTS low-noise 2-channel JFET op-amp. 3MHz bandwidth, 7V-36V supply, DIP 8-pin. Ideal for audio pre-amps & signal processing.
TI TCA9548APWR 8-channel I2C switch, TSSOP-24, 1.65V-5.5V, for servers & routers.
Buy the ONSEMI 74HC08 Quad 2-Input AND Gate. High-performance CMOS logic IC in SOIC package, ideal for industrial applications.
Universal 15.3W USB-C power supply for Raspberry Pi 4. Includes UK, EU, US, AU plugs. Efficient and safety approved.
Broadcom 2-channel SMD optocoupler with 8 pins, 25mA, and 3.75kV isolation. Ideal for signal processing, ground isolation, and line receivers.
VISHAY 1 channel DIP optocoupler with phototransistor output. Features 13.9kV isolation, 75mA forward current, and 4 pins.
Bivar transparent circular press-fit light pipe with UL94V-0 rating. Ideal for panel mounting and industrial applications.
BROADCOM green SMD LED with AlInGaP material. Features 2mm x 1.25mm case, 20mA, 2.1V, 572nm wavelength and 170 degree viewing angle.
CREE LED SMD RGB LED, 4mm, 120° viewing angle. High-intensity red, green & blue light output for electronic projects.
Buy the KINGBRIGHT 3mm blue low power LED lamp. Features 430nm wavelength, 65mcd luminous intensity & through hole mounting. Ideal for LED lighting.
Wurth Elektronik WL-SFSW RGB SMD LED with dome lens and 120° viewing angle. Ideal for backlighting and indicators.
Low-power FireBeetle microcontroller with Bluetooth 4.1 for IoT. Features ATmega328P, Arduino IDE support, and lithium battery power.
