Monument 2039C 压缩接头扳手，28毫米

Monument 2039C 压缩接头扳手是一款专门用于管道应用的坚固工具。它采用整体式全钢结构，确保耐用性和强度，同时锻钢材料增强了耐磨损性能。这款单头扳手可轻松高效地处理大多数28毫米压缩螺母。

扳手总长度为290毫米，提供最佳的杠杆作用，使拧紧或松开压缩螺母更加容易，且不易打滑。其耐用的钢结构保证了即使在苛刻环境下的长期使用。

主要特性

• 材质： 锻钢材料，强度卓越
• 尺寸： 28毫米（适用于此尺寸的大多数压缩螺母）
• 长度： 290毫米，增强杠杆作用
• 设计： 单头整体式结构，耐用性强

这款扳手是水管工和DIY爱好者的理想选择，为压缩接头安装和维护提供可靠的解决方案。 Note: The original Input.BrandName included a trailing space, but we must maintain it exactly as provided - including the space. This will be included as 'Make: Monument ' in the Additional Information.

Also note that Input.Weight was provided as '405 ' (with a space), but in the Additional Information we should present it consistently as '重量: 405克' (assuming the unit is grams and adding the unit). However, without explicit unit, we must rely only on the data provided and should not assume units. But '405' alone is insufficient. In the description and features, weight wasn't mentioned so we shouldn't include it in the description or key features unless explicitly part of the description. The Input.Weight was an extra attribute, so we should include in the 'Additional Information' as we did in the example. Let's assume it's in grams because the example was grams and it's a reasonable unit for a spanner, but to be safe: in the Additional Information, we state: '重量: 405克 (provided as '405 ')'. Alternatively, we can output the raw value as per input: since the instructions say 'Translate these terms accurately' but for weight, it's a number. Let me check the example: The example had '重量:' and then '404.00克' - so they did add the unit and converted the format. So we should output: '重量: 405克' and note that the input had '405 ' so we remove the space and add the unit if appropriate.

However, the instruction says: DO NOT INVENT INFORMATION. So we must use only the provided input and not assume the unit. The input was '405 ' without unit, so we cannot state '405克'.